TP Power 4082 Motor Any Good???

[Drax21]

TP Power 4082 Brushless Motor

3mm mounting screws
25mm apart
5mm output shaft
40x82mm
Includes 6mm gold connectors
$89.99


Just saw this on Kershaw Designs. Looks a quality motor. Dan rates them highly.

BrushlessMotors-TP4082.jpg

[6BOOST]

My understanding is they are a refined version of the leopard motor, certainly very similar side by side. I have some 1160kv versions here and some 1610's coming which I'll review in the next few months. Ben at fightercat also sells them.

6BOOST

[Brushless55]

Hobbyking I bet will sell then soon for 60bucks

[6BOOST]

A good source of mine tells me the HK versions of the TP motors have lower quality bearings and magnets. Time will tell, I have 2 TP motors here and 2x HK on the way in 780kv 5692, so can compare between the 2.

6BOOST

[cybercrxt]

I was just contacted by them to be a dealer. I am working on getting a sample order right now. I am impressed by the looks, just have to see what's inside. I also like the hardwire stator ends sticking outside the can. I have been very disappointed with recent batches of soft wire Neu motors as of late, so we will see. Mike, www.ml-boatworks.com

[Brushless55]

A good source of mine tells me the HK versions of the TP motors have lower quality bearings and magnets. Time will tell, I have 2 TP motors here and 2x HK on the way in 780kv 5692, so can compare between the 2.

6BOOST

Possibly because he (ben) sells them for more?

I was just contacted by them to be a dealer. I am working on getting a sample order right now. I am impressed by the looks, just have to see what's inside. I also like the hardwire stator ends sticking outside the can. I have been very disappointed with recent batches of soft wire Neu motors as of late, so we will see. Mike, www.ml-boatworks.com

Awesme Mike, keep us informed!

[crabstick]

any more info on these motors?

[Steven Vaccaro]

I have some tp 2180kv 4082 motors if anyone's interested. I was going to sell the tp line, but decided against it for now.

[Drax21]

I have some tp 2180kv 4082 motors if anyone's interested. I was going to sell the tp line, but decided against it for now.

How much?

[Steven Vaccaro]

I'm going to drop them in the swap shop tomorrow.

[Drax21]

I'm going to drop them in the swap shop tomorrow.

cool

[Snowride]

Hobbyking I bet will sell then soon for 60bucks

Dang you were close. Actually $51 or $65 shipped if you prefer. http://www.hobbyking.com/hobbyking/s...FInrunner.html

[6BOOST]

Dang you were close. Actually $51 or $65 shipped if you prefer. http://www.hobbyking.com/hobbyking/s...FInrunner.html

Not the same motor.

6BOOST

[srislash]

They have the yellow green and red wires.

[Drax21]

So 2665Watts of power from HKs . TP is meant to use better parts. Let me know when you have put yours up please Steve.