need help with motors

[sean1982]

hi, is there a good water cooled motor that is the equivilent of the proboat 1500kv motor only shorter? like 60mm say?
cheers

[LarrysDrifter]

What hull, voltage, prop are you using it in?

[sean1982]

hull is custom made mono, 790mm, havent got bateries or props yet. i have a hyperperformance leg that im altering to take a proboat engine cowl, so need a short motor.
cheers

[siberianhusky]

Leopard 3650?

[sean1982]

this be ok? http://www.ebay.co.uk/itm/1606726899...84.m1438.l2649
what battery would be good with that?

[JackBlack26]

I thought PB 1500kv was 3656, not 60mm.

These are great motors!http://www.hobbyking.com/hobbyking/s...idProduct=6528

[sean1982]

is the proboat motor 3656? i thought it was 74mm long??

[JackBlack26]

No. It's not 74. Spec motors are 3656.

[sean1982]

cool! so the proboat motor should be fine then! what battery would go well with that? im using a seaking 180amp ESC too.

[siberianhusky]

53mm from the mounting face, 56 if you include the boss in the center where the shaft comes out. Just measured one.

[JackBlack26]

1500kv will do fine with 4-6S. Just make sure they are at least 30C, 40 if less than 5000mah. In my Geico I always ran 4S, 2P though.