throttle question

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Chilli
    replied
    Try reversing the throttle setting on your transmitter.

    Leave a comment:


  • TheShaughnessy
    replied
    Originally posted by dasboata View Post
    I played with EPA and trim it is much better but hard to tell if it is proportional and the trigger matches the RPM as I don't want to over REV it,, thanks for waking up my brain Chris
    looks like you are ready for a on the water test then. Or put a air prop on so you have a load on the motor.

    Leave a comment:


  • dasboata
    replied
    Originally posted by TheShaughnessy View Post
    try recalibrating and messing with the epa on your throttle if it is adjustable. I've had to set a the epa to 0 for negative throttle on a tx once.
    I played with EPA and trim it is much better but hard to tell if it is proportional and the trigger matches the RPM as I don't want to over REV it,, thanks for waking up my brain Chris

    Leave a comment:


  • TheShaughnessy
    replied
    try recalibrating and messing with the epa on your throttle if it is adjustable. I've had to set a the epa to 0 for negative throttle on a tx once.

    Leave a comment:


  • carlcisneros
    replied
    bit of a burn looks like there. not good. :-(

    sounds like you will have to completely reprogram the ESC from scratch.

    jmo

    Leave a comment:


  • dasboata
    started a topic throttle question

    throttle question

    I had some problems at the lake yesterday I lost my settings on the ESC and when I pluged in the Lipos they were at full bore,, I quickly disconnected them and in the process touched the wires together for a split second my ESC has lost it's program settings, But any way I got the boat running and I have to pull back the trigger half way to get the boat to move, and then it is at 1/2 speed at least what do you think I screwed something up ? thanks chris
    Attached Files
Working...