Apparition or Genesis for fun?

[HYDROJERRY]

You need to set the hull on a table with the sponsons flat,, have the strut flat on the table also,,,no pos or neg angle,,run it to see and go from there!!!some also bring the strut up off the table 1/8'' you can try that too..

[penz]

yep, temps seem fine, i only run on 4s so the speed is not blistering but still fun, playing with different props right now.

What props fit the shaft? is it 4mm? And is the stock prop 38mm?

[penz]

What props fit the shaft? is it 4mm? And is the stock prop 38mm?

I did some reading and the prop shaft is 4mm. I ordred a few of the turnigy aquaprops in different sizes, 38 & 42mm. I still plan on upgrading to the 4074 motor in the future. Then ill just keep increasing prop size untill i have found the happy medium between speed and temps on 4s.

[adrianofbr]

And my GC its near the center. I'll move it to back.