looking for a hull to put ul-1 power plant, whatcha got?

[TheShaughnessy]

Yea I would 2p a CC1515, I 2p my leopard 4074 2200kv.... but it wouldn't be neccesary 2p a ul1 motor IMO...

according to my watt meter i was only pulling out roughly 2000 mah after 2 full min of running with an m445. 2p wouldn't be necessary for p spec hydro oval racing IMO. However, i just like running 2p.

[ron1950]

this may be way too common for ya but i love my pursuit with leopard 2200 in it..the kentec version comes with the 3/16 hardware

[Rumdog]

Get a Rico 29 for that ul-1 motor!

[dana]

what about the hor cat hulls? kintec has em for 125 bux

[Alexgar]

Tony has a bby cat in the swap shop it's a full build job if your up to it I love my bbys and this is a 28" lightweight hull check it out

[properchopper]

Tony has a bby cat in the swap shop it's a full build job if your up to it I love my bbys and this is a 28" lightweight hull check it out

Alex, thanks for the referral

http://www.offshoreelectrics.com/for...ad.php?t=24465

Dana, this boat needs trimming, substantial FG or CF reinforcing, hull joining and cowl trimming. Like I said : "not for the timid" BUT a great looking boat which'll rock on spec power once done. Will work the price a tad if you're interested.

[Alexgar]

If you remember I wanted to buy it last month but while haggling on price to cat hardware it was bought I wanted it but got a a ul1 on the way might tie up my time

[dana]

Alex, thanks for the referral

http://www.offshoreelectrics.com/for...ad.php?t=24465

Dana, this boat needs trimming, substantial FG or CF reinforcing, hull joining and cowl trimming. Like I said : "not for the timid" BUT a great looking boat which'll rock on spec power once done. Will work the price a tad if you're interested.

tony, thanks but i just ordered the titan 29. im just looking to have some fun with this one should be a perfect hull for just cruisin around. i like what i saw in your video. turns nicely and isnt stupid fast like my other boats

[properchopper]

Then again, If you do find a Titan 29 and rig it with the UL-1 motor, [ EDIT : looks like you found one,nice !] , later on you can pop in a 2200KV motor like a Neu 1515 1Y and go a little nuts :

http:www.youtube.com/watch?v=KJ0m2lJyAtU

[dana]

Then again, If you do find a Titan 29 and rig it with the UL-1 motor, later on you can pop in a 2200KV motor like a Neu 1515 1Y and go a little nuts :

http:www.youtube.com/watch?v=KJ0m2lJyAtU

love it dood ch33rs! i found one on ose brutha, and yes an upgrade to a leopard is def already goin thru my head

[properchopper]

love it dood ch33rs! i found one on ose brutha, and yes an upgrade to a leopard is def already goin thru my head

Another thing the T29 has going for it is it makes a really nice rough-water "moto-cross" boat. With spec power & 33+% cg she just charges over the liquid whoop-dee-doos Some of the best times I've had with that setup is when things really get blown out

[dana]

Another thing the T29 has going for it is it makes a really nice rough-water "moto-cross" boat. With spec power & 33+% cg she just charges over the liquid whoop-dee-doos Some of the best times I've had with that setup is when things really get blown out

well im happy i made the purchase. should be here by wednesday ose is 20 minutes away, so shipping is REAL fast its great to hear it runs well in some chop. it will be a nice upgrade from the sv i was running

[properchopper]

Of course, not every run ends perfectly , but the hull is solid as a rock

http://www.youtube.com/watch?v=aFFdkgRt-g4

[dana]

Of course, not every run ends perfectly , but the hull is solid as a rock

http://www.youtube.com/watch?v=aFFdkgRt-g4

oh god, dont make me order a leopard before i even try the 2030 motor looks good to me. aeromarine makes some awesome hulls

[properchopper]

oh god, dont make me order a leopard before i even try the 2030 motor looks good to me. aeromarine makes some awesome hulls

I'm lookin' favorably at the new Keda's that Steven just stocked for an intermediate step-up from spec to just slightly less than crazy power. Check 'em out ; specifically the 4D & 2Y. At $69.95 they could be the perfect fun/performance motor :

http://www.offshoreelectrics.com/pro...prod=keda-4074

(not to put ant more ideas in your head ! )