8mm coupler to .187 wrench sizes??

[Steven Vaccaro]

Two small adjustable Crescent wrenches will work. I have seen these sell cheap.

Home Depot was selling them for about .99 or 1.99.

[jingalls007]

Two small adjustable Crescent wrenches will work. I have seen these sell cheap.

Even better.. Thanks man,

[detox]

Two small adjustable Crescent wrenches will work. I have seen these sell cheap.

[jingalls007]

I can take the coupler to the hardware store too but I just figured I'd save myself a step and ask here first. Thank you for your help.

[jingalls007]

not sure on this size but my 5mmx.150 are a 10mm on the flex side and 11mm on the motor side

I've got those two wrenches with me and forgot that when I ordered the 1521 NEU w/8mm shaft I'd also have quite a bit larger collet. Thank you for your help Alexgar.

[jingalls007]

1/2 & 9/16 for my octura coupler with the 2 grub screws

that's what I was looking for, thanks Scoota'

[jingalls007]

Try them until you find two that fit?

Not trying to be a d...Are you ordering wrenches or something or do you have wrenches there?

I knew it was kind of a ridiculous question in the first place but my brother has my wrenches for the next 3 weeks. I didn't want to buy a new set of wrenches just for this. But I don't mind buying just two

[keithbradley]

Try them until you find two that fit?

Not trying to be a d...Are you ordering wrenches or something or do you have wrenches there?

[scoota]

1/2 & 9/16 for my octura coupler with the 2 grub screws

[Alexgar]

not sure on this size but my 5mmx.150 are a 10mm on the flex side and 11mm on the motor side

[carlcisneros]

more than likely 5/8 and 9/16 wrenches.

I havent used octura couplers in a bunch of years.

[jingalls007]

what size wrench's do I need to tighten this beast? thanks =)

http://www.offshoreelectrics.com/pro...oct-ocfhe8mm18