ProBoat A3630-1500 Motor. timing

[MARKY C]

please can someone let me know what the best timing is for this motor. is it a y or d wind 2 or 4 pole motor.. thanks for any replies..............

[Diesel6401]

please can someone let me know what the best timing is for this motor. is it a y or d wind 2 or 4 pole motor.. thanks for any replies..............

It's a 6 pole motor. Not sure on the wind though. I know I ran my stock motor on high timing with the stock esc and the temps were great. With that information I would assume it was a y wind, but that's just a guess & we all know what happens when we assume. What esc you using with it?

Darin Jordan would be the man to ask on that one.

[MARKY C]

turnigy 120 amp running 5s 1p in 1/12 scale miss elam

[Diesel6401]

turnigy 120 amp running 5s 1p in 1/12 scale miss elam

If it was me I would start around 7*, that's just me.

[Fluid]

The stock factory timing advance for that motor is 10*. I've run it at 15* with good results, but unless it is in a very free-running boat I'd stick with 10*.



.

[Diesel6401]

The stock factory timing advance for that motor is 10*. I've run it at 15* with good results, but unless it is in a very free-running boat I'd stick with 10*.



.