What motors MHZ

[dasboata]

Mystic C5000 44.8" cat .the boat came with a motor mount plate with a bolt pattern about 9/16 on center I will be needing a couple of motors FAST MOTORS thanks chris

[carlcisneros]

how bout a couple of CMB 67 green heads?




carl

[dasboata]

how bout a couple of CMB 67 green heads?




carl

Been there done that thanks I think MHZ answered a e mail I was pretty shocked how fast they did I think that is great , they recommended a 2 Leopard4074 2.5Y 2413 on 4-6s Lipos what do you guys think thanks chris

[Fluid]

That Kv will work on 4S but NOT on 6S. You will need a lower Kv for 6S per motor, probably around 1600. The 4074 motors are similar to the Neu 1521s and should work well for your MHZ.



.

[Brushless01]

Two castle creation 1717 motors should be a beast.

[dasboata]

That Kv will work on 4S but NOT on 6S. You will need a lower Kv for 6S per motor, probably around 1600. The 4074 motors are similar to the Neu 1521s and should work well for your MHZ.



.

Jay what kind of speeds do you think I can reach with 4S thanks chris

[Fluid]

Chris, it depends on how long you want to run. Run time depends on pack capacity and motor temperature - heavier motors handle high amp/heat better than lighter ones. Powerwise that is essentially an 8S1P setup and you can prop up to get into the 70s. With 6S per motor, 80s are very doable with that hull. The scale German hulls handle speed better than the US/Canadian racing cats, but they don't turn all that well.


.

[dasboata]

Chris, it depends on how long you want to run. Run time depends on pack capacity and motor temperature - heavier motors handle high amp/heat better than lighter ones. Powerwise that is essentially an 8S1P setup and you can prop up to get into the 70s. With 6S per motor, 80s are very doable with that hull. The scale German hulls handle speed better than the US/Canadian racing cats, but they don't turn all that well.


.

Jay Have you tried that prop yet ? I am a little confused you told me to run 4S know you say to run 6 S is that a type o? I would prefer to run the higher Voltage because I think I can go faster with more volts,, am I wrong about this ? you guys are my imformation guys as I am learning thanks for your time chris

[JMSCARD]

That Kv will work on 4S but NOT on 6S. You will need a lower Kv for 6S per motor, probably around 1600. The 4074 motors are similar to the Neu 1521s and should work well for your MHZ.



.

the 4074's are comperable to the 1515 castle or Neu's .... the 4082 is the 1521 equivelant....

Also what about a couple 1518's ? 4s and 5s...?

[Rumdog]

I'd run the CC/Neu 1520's on 6s each. (IF you can find them) With CR x 447's. Ask Tiqueman how fast it is.

[dasboata]

the 4074's are comperable to the 1515 castle or Neu's .... the 4082 is the 1521 equivelant....

Also what about a couple 1518's ? 4s and 5s...?

I'd run the CC/Neu 1520's on 6s each. (IF you can find them) With CR x 447's. Ask Tiqueman how fast it is.

4 or 5 what ever is faster I guess 5 ,,,,,447 pretty small I would hope to turn bigger then that but what do i know thanks chris

[carlcisneros]

Chris;

Remember, RPM = SPEED

Thats why I will be running 6S2P power on the insane 45" mono with Twin 1400KV motors and twin props of course.

Did alot of homework on this and feel very confident it will go very well.
Carl

[Rumdog]

Tiques HPR 115 with twin 1520's and 447's. Hull is 45", very similar to the Mystic. http://www.youtube.com/watch?v=1yAyT7GdFeI

[dasboata]

Tiques HPR 115 with twin 1520's and 447's. Hull is 45", very similar to the Mystic. http://www.youtube.com/watch?v=1yAyT7GdFeI

Wow nice making some r's for sure and speed I could not find Neu 1520 just 1521 TY

[oscarel]

The 1520's are the Castle's. 76 with twins, that's impressive!