? for outrigger masters

[noodler]

Hey guys I just received a 36" Aeromarine stinger from the swap and shop and have a few questions. I know this thing is pretty heavy would a 1520 1y work I will be running 6s2p also whats a good starting prop with the motor you suggest? thanks and happy holidays

[mr rumrunner hobbies]

do you own the motor or thinking about getting one because the 1527 1y is an animal on 6s 2p and will push anything doug

[mr rumrunner hobbies]

sorry the prop start with a x452 or a 1455 should work if you need lift send me pics when you get the chance

[raptor347]

1527/1Y is the go to 6S motor. 1455 would be my starting point. ABC 2316 is another good choice but takes a little more work on the setup.

What does the bare hull weigh?

[noodler]

I do own a 1520 1y . It looks like I may be looking for a 1527 1y if that dont work. Im kinda on a budget so it may be a while. I'll send some pics when my lady gets home Doug. The hull weighs 4lbs 1oz with hardware motor mount and servo raptor. Thanks for the input guys your help is much appreciated. Jason

[noodler]

Heres som pics.Aeromarine Stinger.JPG

Aeromarine Stinger2.JPG

Aeromarine Stinger3.JPG

[Dangerous_Toys]

Keep posting pics of the build so we can get a look at that Bad Baby!

[mr rumrunner hobbies]

do you mean a 1521 1y nue and did you try to fit 2p in the boat? that is 2 6s battery packs? they take alot of room.

[noodler]

The builder him self. Robert what did it look like before I got it im curious to know? I cant wait to get it going! Mr rumrunner its a castle 1520 1y not a Neu. Im gona try 2 2500mah 6s paks just need pick them up from friend to test fit.

[mr rumrunner hobbies]

i dont know about the motor and the bats maybe will work ,if you dont have to buy it and already have it GIVE IT A GO let me know how it runs doug

[Dangerous_Toys]

I'll post some pics for ya tonight.

[Dangerous_Toys]

When I ran it I used Feigao 9XL with a T180 esc on two turnigy 3s 3000 30c batts in series. When she got on plane she flew. I would suggest getting a lifter prop and fine tune the strut. With the right setup I'm sure she will run 60+.

[Dangerous_Toys]

Here ya go Jason. The pics of her when I first started on her. Had to do a little glassing for the canopy and rear deck lid.....

[noodler]

Thanks Robert, the boat turned out great as far as i can tell. thanks again.