Jeff Wolt, Looking for 4mm clockwise cable/shaft

[jimbo--jones]

Jeff, I have been told you might be able to help me get a 4mm shaft.
Im looking for a clockwise rotating .15 cable and 4mm shaft to fit the 4mm hor racing stringer.

This one here:

http://www.horracing.com/product_info.php?products_id=318

Or mabey just a clockwise .15 cable with a square end?

Thanks heaps

[Jeff Wohlt]

You want a 4mm stub with a 150 cable? Doubt it ...would be so thin it would not hold on the stub walls. I can do 130 cable.

I might be able to do 150 but I have to remove a layer of the 150 winding. Then it could be silver brazed.

[jimbo--jones]

The stub I have now fits a square end .150 cable. The cable just slips in there.
The start of the shaft it is 0.209"/ 5.31mm diameter and 17mm long, the rest of it is 4mm diameter and the entire shaft is 62mm/2.441" long.

I don't suppose you have .150 cable with a square end for clockwise rotation do you?

[Jeff Wohlt]

No....no sq ends.

[jimbo--jones]

Ok sweet cheers Jeff. Had a look on your site. Ill just mod the stringers for a 3/16 stub grab some of the ones u got on there once I know the lengths.

[Jeff Wohlt]

Best option then get some 150 cables.