Hi, I'm running 25" with a 88 max amp motor, 120 esc and two 3s 2200 mah 25c lipo batts. When i run the throttle the speed will fluctuate, sometimes turn on and off. 
gartman.paul@gmail.com
gartman.paul@gmail.com
-
Last edited by gartman; 09-03-2010, 09:43 PM. -
If you really want some help here you need to give us all some more info on your boat.
Hull, Motor, ESC Battery, Prop? when you post these general questions its hard to help.
We all love to help newbies out so post some photos and include more info please2 SV 27's and Vac-U-Pickle UL-1 Power
-
Check your CAPS on the ESC .... Have a look to see if the ends of the caps are rounded , cause they should be flat , this could cause your problem , just because your motor is rated 88 amps ,it could draw double that by over proping ....UL1- 1515 castle/neu / 240 swordfish
SV27- with UL1 running gear
33 Delta Force - 1521-1.5D/Neu/ 240 swordfish/4S2PComment
-
Its a v hull with Fiego 3511 kv, Castel Creation 120 esc 35mm propOriginally posted by wizard122 View PostComment
-
-
Caps
If the shiny end of the cap is bulged out the cap is NG and needs to be replaced2 SV 27's and Vac-U-Pickle UL-1 Power Comment
-
Post some photos!!!!!!!!!!!!!2 SV 27's and Vac-U-Pickle UL-1 Power Comment
-
Their fine.Comment
-
Leaning how to do that.Comment
-
the black can shaped things hanging off the end of your ESCUL1- 1515 castle/neu / 240 swordfish
SV27- with UL1 running gear
33 Delta Force - 1521-1.5D/Neu/ 240 swordfish/4S2PComment
-
ThanksComment
-
too quick for me Wizard , lolUL1- 1515 castle/neu / 240 swordfish
SV27- with UL1 running gear
33 Delta Force - 1521-1.5D/Neu/ 240 swordfish/4S2PComment
-
Throttle Fluctuation
Would my receiver have anything to do with motor cutting in and out, the servo for the rudder is working fine.
Comment
-
I don't think so have you subed out any other parts?2 SV 27's and Vac-U-Pickle UL-1 Power Comment
-
Are you running the batteries in series or parallel....did you flip the hull and components get wet?
DouggieComment
Comment