Prop spinning wrong way

[Brushless01]

Hi I have just finished building a delta force 29 Knock off with supervee 27 motor and esc with speedmaster hardware. I powered it up for the first time and the prop span to the left. Whats wrong here ??

Thanks

[video200]

swap 2 of the motor wires to make it go the other way around

[Brushless01]

I tried that which colours should i swap ??

[video200]

dont matter. just swap 2 of them and you should be good to go

[Brushless01]

Tried that blue to red didnt work now trying blue to yellow

[Brushless01]

Tryed switching all the wires didnt make any difference what so ever

[video200]

you did 2 at the time right ?
2 of 3 wires

[Brushless01]

Whitch way should the prop actually turn

[Brushless01]

you did 2 at the time right ?
2 of 3 wires

yes you cant only change 1 can you

[video200]

lol no thats true.
my mind is not always with me im afraid :)

[Brushless01]

Which way should it actually turn

[video200]

a brushless motor SHOULD switch the way it turns with swapping the wires.

there is not a set way it should turn. they can turn both ways just as good

[ED66677]

counter clockwise when looking at the prop from the back... but depends if you spin a L or R prop!

[Brushless01]

The props meant to spin to left yes

[ED66677]

then swapping 2 wires should change motor direction