Another new hull from HK??

[Spot Me 2]

I like the looks of it. It doesn't look to bad in the Video either.

http://www.modelengines.com.au/view/page/27/item/DHP-10021.html

[Spot Me 2]

Nice looking cat too

http://www.modelengines.com.au/view/...DHP-10117.html

[ozzie-crawl]

the link you show is model engines ???
looks ok but a 4500kv on 2s is not a good idea imo even tho its only a 23" boat
would have been nice to see it turn right in the video instead of all left hand turns

[ozzie-crawl]

Nice looking cat too

http://www.modelengines.com.au/view/...DHP-10117.html

yea that looks okay,could be a nice runner with a ul-1 motor

[befu]

Nice looking cat too

http://www.modelengines.com.au/view/...DHP-10117.html

I like the size. Seems like there was a glut of 32" cats on the market. Proboat is going slightly smaller at 30". then you get smaller cats in the 15" to 18" range.

A nice scale offshore cat at 25.5" long, nice.

Still, I am getting tired of asian hulls. Have 32" cats, the skunkworks and the HK apparition. both leave a lot to be desired in glass work and straightness. Great for the price, but you can tell the quality for that price. We need a well made cat in the 2 foot range.

Brian

[SNIPR806]

I found these on the bay today. The electrics especially the 2.4ghz is a relabeled Hobby Partz / Hobby King radio system. Are these cats relabeled as well? These are hulls only and do seem a little high priced?

http://www.youtube.com/watch?v=1wkllgH3mfQ&feature=player_embedded

[video200]

A nice scale offshore cat at 25.5" long, nice.

Still, I am getting tired of asian hulls. Have 32" cats, the skunkworks and the HK apparition. both leave a lot to be desired in glass work and straightness. Great for the price, but you can tell the quality for that price. We need a well made cat in the 2 foot range.

Brian

then you wil love the drifter S and agiator S from H&M

http://www.hydromarine.de/hm_11138.htm

http://www.hydromarine.de/hm_20661.htm

http://www.hydromarine.de/hm_22281.htm

klaus

[befu]

then you wil love the drifter S and agiator S from H&M

http://www.hydromarine.de/hm_11138.htm

http://www.hydromarine.de/hm_20661.htm

http://www.hydromarine.de/hm_22281.htm

klaus

I hadn't seen the small 27" agitator S before. A little close to the 32" size, but a nice hull. I have been trying to do a vacuum formed 18.5" mystic, but it is not going as well as I had hoped. It is still really small, that 22" baby freya looks very nice!

Never went with the H&M product line as state side you have to deal with fine design and opted not to go that route as I am not local to him.

Thank you for posting that, will have to remember that for future reference.

Brian

[befu]

Another HK 1/16 hydro this time

Well, looks like a 1/16 "scale-ish" modern pickle fork size hull at 22.5" long setup for 3s on a 380 size WC inrunner. $140 + del/rc/servo/battery.

http://www.youtube.com/watch?v=30iw8a--C6w

[Rumdog]

befu, that hull is a delta Force Vortex hull.

[CornelP]

It is also similar to the Pelikan hull
http://www.rcm-pelikan.cz/index.php?...=38170&lang=en
It's about 267$, and the quality is very good, I had one of their hulls in my workshop for repairs:
http://www.rcm-pelikan.cz/index.php?...=38169&lang=en

[ray schrauwen]

I like that cat, nice little brother to the EKOS...

I would love to drop a pair of Turnigy 28mm outrunners in there and do it twin drive.

No prices I see.....????

[Gerwin Brommer]

How about a 60cm (about 2 ft) Micro Mystic in glassfiber (no gelcoat) ??????
This is the first one :

[befu]

befu, that hull is a delta Force Vortex hull.

That thought did cross my mind, but I didn't take the time to go look at it. I would prefer the outrunner version that Steve sells. Wonder if it is made by DF or if it is a copy with two fins added.

Brian

[sjslhill]

Check this one out....
http://www.hobbyking.com/hobbyking/s...dProduct=13779

Just added today.....