Are these Motors any good?

[NOZ69R]

Has anyone used these style motors like this one?

Brushless motor Model SeaMonster-3650-2300Kv
Rotational Speed 2300Kv (rpm/v)
Max Current 60A
Power (W) 800W
Input Voltage 7.4v- 18.5v
Motor Weight 290g
Motor Weight 310g
Max. Efficiency 98%
No Load Current 1.8A
Internal Resistance 19m Ω
Motor Dimensions (Diameter x Length) 43mm x 63 mm + 10mm(Pipe)
Shaft Dimensions (Diameter x Length) 4.0mm x 15mm
Input Battery Types NiCd/ Nimh/ Li-po Battery
Cooling Type Water Cool
Wire Winds 6
Recommend Model RC Model Boat

Thinking of one as a replacement for my Apparition and for only $25 I could be tempted

Cheers

[Diesel6401]

Never used that motor, at 3650 it might be on the small side for a apparition though. It would be working very hard in a 30"+ cat. Try a 540xl type motor or the leopard 4074. Actually a leopard in that hull of yours on 4s might rip.

I have a XL motor for sale in the swap shop http://forums.offshoreelectrics.com/...620#post207620

[crystalclearvisual]

Never used that motor, at 3650 it might be on the small side for a apparition though. It would be working very hard in a 30"+ cat. Try a 540xl type motor or the leopard 4074. Actually a leopard in that hull of yours on 4s might rip.

I have a XL motor for sale in the swap shop http://forums.offshoreelectrics.com/...620#post207620

Can you get a 74mm motor in the hull

[785boats]

Hi crystalcearvisual.
Yep. I've had the 8Xl in mine pushing it to over 50mph on an X440/3 prop with 4s.

NOZ69R
I think you'll find that diesel is right. The 50mm motors are a bit small for a cat this size.

Cheers.
Paul.

[Make-a-Wake]

NOZ69R,

here's a 56mm version of the motor you posted, this would be good on 4s if you are wanting to go the bargain route.

http://cgi.ebay.com/EC-Boat-RC-Outru...item3f098115dd