Insane Boats P-Spec Sport Hydro 1st run with Vid !!!

[johnf]

I run that motor in my 33" Aeromarine P Sport Hydro, it runs very well! It will take a lot of prop, I normally run a P230 since an x450 was too mild. I can prop up to a P235 or more - but the 230 is plenty for the smaller pond we run at the most. That motor will be plenty for the Insane. If I race the hull as a P Sport I'll probably use a Hacker 7XL, but I plan on LSH only.



.

Thanks for the info! I actually bought the 1521 with a DF storm 33 mono. What speed control did you run on the 33 hydro with the 1521?

[Brushless55]

Dude, 2 bolts

[Fluid]

What speed control did you run on the 33 hydro with the 1521?

I'm right at 60 mph with the P230. On the small pond that's fast enough, on the big ponds it is often too windy here to run any faster. On smooth water with enough pitch 65 should be possible without too much stress.


.

[knpc]

I ordered a hull and hardware from Jeff (Insane) yesterday. I have a 1515/1y and hydra 240 ready to go in it. It should be a nice setup, but I'll let you know in a few weeks.

[johnf]

I'm right at 60 mph with the P230. On the small pond that's fast enough, on the big ponds it is often too windy here to run any faster. On smooth water with enough pitch 65 should be possible without too much stress.


.

Thanks for the prop info, but I was curious about the ESC you were using to handle the load. Perhaps you missed it in my post?

[Flying Scotsman]

Mine is going to run a Neu 1415 1Y...4S1P.....Turnigy 180 amp marine....and a mangled X642 from the hands of egneg.

Douggie

[Jeepers]

Thanks for the prop info, but I was curious about the ESC you were using to handle the load. Perhaps you missed it in my post?

I use a Castle Hydra 240 with my 1521 1.5d in my Whiplash 20.

[ray schrauwen]

Arc has a nice 36 65 1 turn 2080Kv. Jet guys are pulling like 2000+ watts from them. Nice for an American made 4 pole B/L motor and only $125. Lightflght rc. com Solid competition for a Neu.

I'm going to try it in my Whip this Sun.


Ooops, make that $115 + shipping...

[Fluid]

Thanks for the prop info, but I was curious about the ESC you were using to handle the load. Perhaps you missed it in my post?

Sorry, I was in a hurry and only saw the word speed. I run a Hydra240LV with 4 degrees timing advance, 13.6 LVC. Fast and relatively cool, the ESC has lasted over a year of racing without a hiccup.


.

[johnf]

Damn you guys! All it took was one email to Jeff!

[properchopper]

Damn you guys! All it took was one email to Jeff!

Good job, John ! With your order in, I get to win a set of Steak Knives from Jeff for helping with the design / intro !

You're gonna' LOVE this boat

Tony

[johnf]

LMAO! I'm sure I will. Jeff's willingness to add some custom work to the boat per my request is what got me on board. Gotta love when someone will cater to your goals!

[ray schrauwen]

You guys are killing me... take CC you say?? Damn I'm bad....

[properchopper]

LMAO! I'm sure I will. Jeff's willingness to add some custom work to the boat per my request is what got me on board. Gotta love when someone will cater to your goals!

Very true - Jeff and his people are 150% dedicated to making the best, fastest products for his customers. They're constantly at the lake innovating, testing, tuning, and helping customers dial in their stuff.

[johnf]

They're constantly at the lake innovating, testing, tuning, and helping customers dial in their stuff.

I wish my job was that much fun!