Insane Boats P-Spec Sport Hydro 1st run with Vid !!!

[Jeepers]

jeepers if you like painting then just order your boat in epoxy and jeff will put a white primmer on it instead of gel coat.

Mark

sweeet!

[johnf]

So, how long does it take to have one of these hulls built after the order, roughly?

[properchopper]

So, how long does it take to have one of these hulls built after the order, roughly?

Call or e-mail Jeff at Insane Boats; He'll give you the best answer. Shouldn't take long !

[Darin Jordan]

So, how long does it take to have one of these hulls built after the order, roughly?

Jeff told me it'd be about 2-3 weeks before I got mine.

[johnf]

PLEASE tell me Jeff doesn't take credit cards..... LOL


Also, how do you guys think a 1521 1.5d would do in this hull? I just picked one up in the swap shop, and was debating saving it for this hull, and running something with a lower KV in the hull I bought it with. The 1.5d is 1860kv.

[Darin Jordan]

PLEASE tell me Jeff doesn't take credit cards..... LOL

As a matter of fact... he DOES!

Also, how do you guys think a 1521 1.5d would do in this hull? I just picked one up in the swap shop, and was debating saving it for this hull, and running something with a lower KV in the hull I bought it with. The 1.5d is 1860kv.

Don't know for sure, but I have one here as well that I will be finding out with...

[johnf]

DAMN! Well, looks like I may be shooting Jeff an email later this month... Darin, PLEASE report your findings with this motor. I may very well scoop this hydro up if it runs good with that setup. Can't wait to hear your results.

[Darin Jordan]

DAMN! Well, looks like I may be shooting Jeff an email later this month... Darin, PLEASE report your findings with this motor. I may very well scoop this hydro up if it runs good with that setup. Can't wait to hear your results.

I really have no doubt that it will... it's a little bigger than a Phil Thomas 21 (older version) and I've seen that boat with a hotter setup go incredibly fast and was raceable as well...

[johnf]

I hear ya Darin, and am more so waiting for real world results with the motor as a way to keep myself from dropping the coin at this moment. I think I stumbled upon an addiction. haha!

[properchopper]

PLEASE tell me Jeff doesn't take credit cards..... LOL


Also, how do you guys think a 1521 1.5d would do in this hull? I just picked one up in the swap shop, and was debating saving it for this hull, and running something with a lower KV in the hull I bought it with. The 1.5d is 1860kv.

Mark has a 1527 [??] in his new Insane Hull. Wait for those results !!!!

[johnf]

I have no doubt the 1527 Mark has will be a MONSTER. Point being, I already have the 1521 1.5d. Already owning the motor makes this much more appealing, seeing as how the motors cost about as much as the hull. haha

[Brushless55]

does anyone put the hull and hardware together for a single price?

[Fluid]

I have no doubt the 1527 Mark has will be a MONSTER. Point being, I already have the 1521 1.5d. Already owning the motor makes this much more appealing, seeing as how the motors cost about as much as the hull. haha

I run that motor in my 33" Aeromarine P Sport Hydro, it runs very well! It will take a lot of prop, I normally run a P230 since an x450 was too mild. I can prop up to a P235 or more - but the 230 is plenty for the smaller pond we run at the most. That motor will be plenty for the Insane. If I race the hull as a P Sport I'll probably use a Hacker 7XL, but I plan on LSH only.



.

[ray schrauwen]

does anyone put the hull and hardware together for a single price?

Dude, 2 bolts

[Darin Jordan]

I run that motor in my 33" Aeromarine P Sport Hydro, it runs very well! It will take a lot of prop, I normally run a P230 since an x450 was too mild. I can prop up to a P235 or more - but the 230 is plenty for the smaller pond we run at the most. That motor will be plenty for the Insane. If I race the hull as a P Sport I'll probably use a Hacker 7XL, but I plan on LSH only.



.

Yup... I'm listening to Jay!