What Feigao 580l motor for a 37.5" Mono

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • agressive1
    Member
    • Feb 2010
    • 89

    #76
    How can you hold me one Steven, i want a 1527 1Y or something similar or faster even a 1.5d as long as it can hold 6s.

    Kind of need it in a hurry because its a school project. Expensive school project.

    Comment

    • agressive1
      Member
      • Feb 2010
      • 89

      #77
      I know ive asked this so many times but i seem to get no answer.

      According to the Neu chart if i want to run 6s its suggested to get a 1527 1Y.

      Although i would like more speed and have been told to get the 1527 1.5D but they say to not run it on 6s and on 4s according to the Neu chart.

      So does the 1.5D have more power then the 1Y and can i run the 1.5D on 6s?

      Also i dont get the Neu chart, it like says for a small hull 30 to 34" which they classify it as being a heavy hull, wont it be the larger the hull the heavier it will be as they got larger hulls which are 39" to 41" and they say they are small Light hulls.

      So my big question is i want speed do i go for the 1.5D and run it on 6s instead of the 4s thats recommended or do i go for the 1Y and run it on 6S???

      Comment

      • Rumdog
        Fast Electric Addict!
        • Mar 2009
        • 6667

        #78
        the 1.5d pushed my heavy sprintcat to about 64 mph on 5s2p with a CC lv 240 and a x455. Temps were pretty warm on all components though. The same speed could have been reached with a 1y on 6s2p and cooler temps though.

        Comment

        • Steven Vaccaro
          Administrator
          • Apr 2007
          • 8932

          #79
          Originally posted by agressive1 View Post
          How can you hold me one Steven, i want a 1527 1Y or something similar or faster even a 1.5d as long as it can hold 6s.

          Kind of need it in a hurry because its a school project. Expensive school project.
          I'm sorry if you are in a hurry, I have to suggest you find someone that has them instock. I dont want to promise you something I can't get quickly.
          Steven Vaccaro

          Where Racing on a Budget is a Reality!

          Comment

          • Make-a-Wake
            FE Rules!
            • Nov 2009
            • 6057

            #80
            Originally posted by agressive1 View Post
            I know ive asked this so many times but i seem to get no answer.

            According to the Neu chart if i want to run 6s its suggested to get a 1527 1Y.

            Although i would like more speed and have been told to get the 1527 1.5D but they say to not run it on 6s and on 4s according to the Neu chart.

            So does the 1.5D have more power then the 1Y and can i run the 1.5D on 6s?

            Also i dont get the Neu chart, it like says for a small hull 30 to 34" which they classify it as being a heavy hull, wont it be the larger the hull the heavier it will be as they got larger hulls which are 39" to 41" and they say they are small Light hulls.

            So my big question is i want speed do i go for the 1.5D and run it on 6s instead of the 4s thats recommended or do i go for the 1Y and run it on 6S???
            Why do you think you cant run a 1.5D on 6s? If you prop it correctly, it should be fine according to the chart i'll post below which states its capable of 60,000 rpms and 40 volts, which you would be nowhere near. The neu's are supposed to handle rpms and juice..............hence the price.

            http://www.offshoreelectrics.com/neu-motor-chart.htm

            Check this guy out running a Neu 1521 in a Shockwave! Folks will do anything.....i like it!

            Last edited by Make-a-Wake; 05-14-2010, 12:17 PM.
            NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

            Comment

            • agressive1
              Member
              • Feb 2010
              • 89

              #81
              I have to admit i do want more speed then that video shown, maybe i should go for the 1.5D, anyone else think so?

              Comment

              • Make-a-Wake
                FE Rules!
                • Nov 2009
                • 6057

                #82
                The vid is with a 1521..........your wanting a 1527, big difference!
                NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

                Comment

                • Rumdog
                  Fast Electric Addict!
                  • Mar 2009
                  • 6667

                  #83
                  A 1527 1.5d pull BIG amps. If you run 6s and prop down, whats the point. You want to take advantage of the ability to swing a big prop, hence the big motor. I'd say it's good for 5s max unless it's a saw setup.

                  Comment

                  • agressive1
                    Member
                    • Feb 2010
                    • 89

                    #84
                    So what motor should i be going for to reach at least 60mph or more?

                    The 1527 1.5D or the 1521 1Y, or something else?

                    Comment

                    • Rumdog
                      Fast Electric Addict!
                      • Mar 2009
                      • 6667

                      #85
                      the 1527 1y

                      Comment

                      • Brushless55
                        Creator
                        • Oct 2008
                        • 9481

                        #86
                        Originally posted by Rumdog View Post
                        the 1527 1y
                        could the 1521 get it close to 60mph ?
                        .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                        Comment

                        • Make-a-Wake
                          FE Rules!
                          • Nov 2009
                          • 6057

                          #87
                          Originally posted by agressive1 View Post
                          So what motor should i be going for to reach at least 60mph or more?

                          The 1527 1.5D or the 1521 1Y, or something else?

                          I'd go with the 1527 1Y on 6s, the 1521 wont get you 60............high 40's maybe.
                          NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

                          Comment

                          • agressive1
                            Member
                            • Feb 2010
                            • 89

                            #88
                            Ok the 1527 1Y it is.

                            What do people use the 1527 1.5D in?

                            Comment

                            • agressive1
                              Member
                              • Feb 2010
                              • 89

                              #89
                              Also what timing do i put on my Seaking ESC for the 1527 1Y?

                              Comment

                              • Scott T
                                Senior Member
                                • Oct 2007
                                • 625

                                #90
                                Originally posted by agressive1 View Post
                                Ok the 1527 1Y it is.

                                What do people use the 1527 1.5D in?
                                In our club 1527/1Ys are popular in 6S monos, and 1527/1.5Ds are popular in 6S sport hydros.
                                Scott Tapsall
                                Pine Rivers Model Powerboat Club - Facebook Page
                                My Gallery

                                Comment

                                Working...