Neu motor jacket question

[Darin Jordan]

I will never buy a cheap motor again.

Amen to THAT! Buy it right, but it ONCE!

And, by the way... Steven IS a Neu Dealer... as you will likely soon all find out...

Steven, please put me on the short list for three of the 15-series ESC cooling jackets when they are ready... I'll let the other 30+ "yo-yos" in our club know you are going to have these available... We haven't typically had issues with motor heat, because, as with all QUALITY motors, they are manufactured to exacting tolerances and with superior matrials and tend to sink the little bit of heat they generate at 90%+ efficiency pretty well on their own... Guess this just means us "yo-yos" will be able to push them a little harder...

And, for the record, I've been running Neu motors ALL season on last years Barracuda 125 ESCs with zero issues... both in N2 and in P... on Lipos... Greg Schweers has been running the same only with his Hydra 120s... No problems... Just a couple more "yo-yos" going 60mph+... pretty much side-by-side, I might add...

Thanks Steven for stepping up and making this product... It's going to sell very well...

[Doozie870]

Maybe this off season you or one of the 30 club members could send one to the fiego factory for cloning, then we all could enjoy them.

[SJFE]

Amen to THAT! Buy it right, but it ONCE!

I hope that when they are listed the full specs IE amp & volt ratings are includd in the descriptions. Further more a comparison to what us Feigao/ Ammo ect, guys run would be HUGE . I STILL cant figure out what the hell is for what app with them

[SJFE]

Maybe this off season you or one of the 30 club members could send one to the fiego factory for cloning, then we all could enjoy them.

HAHAHAHAH ROFLMFAO You go Dooz

[Steven Vaccaro]

Steven which controller are you thinking about selling with no warranty for $50.00?

that was an example.

[Darin Jordan]

Maybe this off season you or one of the 30 club members could send one to the fiego factory for cloning, then we all could enjoy them.

Hmmm... Seems that's been tried... Tough to "clone" quality materials and workmanship...

[Steven Vaccaro]

This is way off subject! Please bring it to a Neu thread.

[Rc1racing]

This is way off subject! Please bring it to a Neu thread.

So how much longer? I will have my HPR going as soon as the motors get here.

[wickedgmc]

This is way off subject! Please bring it to a Neu thread.

I agree, I need 4 of the 1515 series and 2 of the 1521 series please. I will pay ASAP!!!

thanks Steven

[Darin Jordan]

I agree, I need 4 of the 1515 series and 2 of the 1521 series please. I will pay ASAP!!!

thanks Steven

Steven, if you are doing a special size for the 1521, I'll need at least one of those as well... So let's just say 4 of the 1515 size, and 2 of the 1521 size...

[NorthernBoater]

Put me on the list for 2 of the 1515 jackets.

[C.Smock]

steven are you actually geting a count here or taking names or what?

hows this gunna work? just askin...

[Steven Vaccaro]

I ordered 40 of them to start. Should hold most everyone over. They will be 2.25" long. Longer ones will follow.

[wickedgmc]

I ordered 40 of them to start. Should hold most everyone over. They will be 2.25" long. Longer ones will follow.

thank you sir

[C.Smock]

alrighty between me and my dad i think we will end up with 4-5