Who runs an Outrunner in their boats?

[Fluid]

This is the only outrunner I've used, and only the second one I've personally seen in a true FE boat. The other set a SAW record several years ago at Valdosta.


./

[Meniscus]

Thanks for the input Jay. Have you run outrunners in any other boats?

Funny Don!

[dirtysouth31]

[egneg]

It appears dirtysouth went way beyond silly . . . .

Hence the name ... Dirtysouth.

[screwball]

ive got one in my renegade rigger lol the one that you buy with the kit but i haven't used it yet, but i will in about 2 weeks!

[FloatDaBoat]

All input is welcome. No one will judge the silly things that anyone does from time to time!

It appears dirtysouth went way beyond silly . . . .

[Fluid]

I was looking for a sport motor for my 34" 6S SprintCat. I like the boat a lot, but it is way too fast (60+) for the small pond near my home. I chose the Scorpion 4025/1100; running on 6S1P with an x450 it runs near 40 mph for over 5 minutes. That is fast enough to be fun and long enough to be ready to bring it in. Amp draw is low for a motor with a 100 amp top end - nothing gets above 100F. More Kv is needed for higher speeds but that wasn't my goal. I got mine from Jim at southriverrcboats.




.

[dirtysouth31]

I dont

[bustitup]

Thanks for posting the info. Have you used them in any of your boats and what has the result been?

have not used it yet but the 4035-800 I own is going into the 41" cat in my avitar

beleive me i have done a ton of reading up on scorpion outrunners and ALL I see is good news on both small and large motors

[Meniscus]

Thanks for posting the info. Have you used them in any of your boats and what has the result been?

[bustitup]

ben
best place for scorpion outrunners is here..they got the best price and a 5% discount on somethings when you register..also check out the water cooles motor mounts for outrunners there

http://www.southriverrcboats.com/shop/category_18/Brushless-Out-Runners.html?shop_param=cid%3D%26

I figured we could all learn from each other's experience:

Who runs an Outrunner in their boats?

• Which one did you use? Manufacturer, size, KV, etc.? Link if you can find.
• What hull did you use it on?
• How did it perform for you?
• Have you tried any inrunners on this same hull?

All input is welcome. No one will judge the silly things that anyone does from time to time!

[Meniscus]

I figured we could all learn from each other's experience:

Who runs an Outrunner in their boats?

• Which one did you use? Manufacturer, size, KV, etc.? Link if you can find.
• What hull did you use it on?
• How did it perform for you?
• Have you tried any inrunners on this same hull?

All input is welcome. No one will judge the silly things that anyone does from time to time!