Prop reccomendations please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JimClark
    Fast Electric Addict!
    • Apr 2007
    • 5913

    #1

    Prop reccomendations please

    I am getting into new territory this coming year. I am going to race with Puget Sound Fast electrics in two classes. Problem is I have no idea as to which props to keep an eye out for. Here are the two setups I am am working on.

    Vs-1 powered by a UL-1 motor and UL-1 ESC and a REK lower unit and will run a 4s 5000 mah lipo

    LSH a Maus Shovelnose 24in long runnign a UL-1, wiredrive and also a 5000mah lipo with either a UL-1 ESc , If I can find a decent deal on one, or
    one of these http://hobbycity.com/hobbycity/store...es_90-100A_ESC

    Any prop recommendations? I cant afford to have a huge prop box like some do and want to limit it to two or three for each boat.

    Jim
    Last edited by JimClark; 12-30-2009, 02:53 PM.
    "Our society strives to avoid any possibility of offending anyone except God.
    Billy Graham
  • m4a1usr
    Fast Electric Addict
    • Nov 2009
    • 2036

    #2
    What speedo do plan on running in the Maus? I ran a cuda125 in mine, sport not club racing, and I was happiest with an X440 cut down to 38mm. But a V935 does very nice too. If memory serves me anything below 40mm runs that hull well but I bet the range is really between 35mm to 38mm. Its been about a year since mine has gotten wet so maybe someone whose memory is fresher might offer a better recomendation.

    John
    Change is the one Constant

    Comment

    • JimClark
      Fast Electric Addict!
      • Apr 2007
      • 5913

      #3
      Added ESC info

      Originally posted by m4a1usr View Post
      What speedo do plan on running in the Maus? I ran a cuda125 in mine, sport not club racing, and I was happiest with an X440 cut down to 38mm. But a V935 does very nice too. If memory serves me anything below 40mm runs that hull well but I bet the range is really between 35mm to 38mm. Its been about a year since mine has gotten wet so maybe someone whose memory is fresher might offer a better recomendation.

      John
      "Our society strives to avoid any possibility of offending anyone except God.
      Billy Graham

      Comment

      • bustitup
        Fast Electric Addict!
        • Aug 2008
        • 3072

        #4
        I have a GrimRacer L45x68 Lifter Metal Boat Propeller from AquaCraft...it sells for $28

        take mine for $18 shipped.......looks like new
        SPRINT CAT 40.........BOOGIMAN 25" MONO 8xl
        EX President of the Offshore FE Vultures Society

        Comment

        • detox
          Fast Electric Addict!
          • Jun 2008
          • 2357

          #5
          The VS-1 should do good with the Octura x442. The Shovel will fly using m440, Grimracer L40 x 57/3 or x442. So maybe I would use the simple x442 in both hulls.

          If using the Aquacraft UL-1 ESC be sure to add extra caps.


          ...

          Comment

          • egneg
            Fast Electric Addict!
            • Feb 2008
            • 4759

            #6
            I can't say about the VS-1 but I run a Prather 215 on my 24" shovel.
            IMPBA 20481S D-12

            Comment

            • detox
              Fast Electric Addict!
              • Jun 2008
              • 2357

              #7

              Comment

              • H&MWill
                Senior Member
                • Apr 2007
                • 680

                #8
                I have a Prather 220 on my shovel with a SV motor and ESC. Also likes the Grim 42mm
                Many issues!!!

                Comment

                Working...