Question about EagleTree loggers

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • NitroVal
    Senior Member
    • Jun 2009
    • 423
    #1

    Question about EagleTree loggers

    Are they able to record amp draw for two motors? Or would I have to buy another logger?
    The RTR Nightmare- Electric King of Shaves
    Now with 540s- 62mph
    New setup- Etti 150A's, Turnigy 2600s, 5S, X442s and a whole lot of cooling hoses
    Tags: None
    • AntronX
      Senior Member
      • Jul 2008
      • 361
      #2
      If you wire both controllers in parallel, then Yes.

        Comment

        • NitroVal
          Senior Member
          • Jun 2009
          • 423
          #3
          Nope, they are completely seperate.
          The RTR Nightmare- Electric King of Shaves
          Now with 540s- 62mph
          New setup- Etti 150A's, Turnigy 2600s, 5S, X442s and a whole lot of cooling hoses

            Comment

            • AntronX
              Senior Member
              • Jul 2008
              • 361
              #4
              Then measure one at a time. Your motors should be identical, so I would assume other pulls the same. But check them both to be sure.

                Comment

                • ED66677
                  Fast Electric Addict!
                  • Apr 2007
                  • 1300
                  #5
                  the Eagle Tree MicroLogger connect between batt and ESC so if only one ESC is connected to one pack then only one
                  Emmanuel
                  I'm french but I doubt I really am!
                  http://pagesperso-orange.fr/pleindetrucs/

                    Comment

                    Previous template Next
                    Working...