FlySky binding compatibility

[dasboata]

I hold the bind button down for about 15 solid red seconds, turn off and unplug everything, plug the battery & steering servo in turn the radio boak on works everytime and I did have problems the 1st few times I tryed !!

[tlandauer]

Tim, got the receivers and I was able to bind them all. The FS-GR3F requires the bind plug to be where the battery would normally connect. Same for the hobbyking ones. I'll put them back in the mail to you tomorrow :-).

Oscar

Oscar, why don't you keep half of it, I meant to gove them to you anyway, if you really want to send some back, just three, give me one orange one just for the hell of it.
I thought I plugged the binding plug in the correct port, I will have to try, sorry you have to go to the P.O.
Might have to ask you to walk me thru this.

[tlandauer]

I hold the bind button down for about 15 solid red seconds, turn off and unplug everything, plug the battery & steering servo in turn the radio boak on works everytime and I did have problems the 1st few times I tryed !!

Yes, I did as well, but I think in the end I have the binding plug in the wrong port on these newer versions though.

[oscarel]

Oscar, why don't you keep half of it, I meant to gove them to you anyway, if you really want to send some back, just three, give me one orange one just for the hell of it.
I thought I plugged the binding plug in the correct port, I will have to try, sorry you have to go to the P.O.
Might have to ask you to walk me thru this.

That's fine, I'll get them out tomorrow. It can be a little confusing with the way they have the label, I initially had issues because I was putting the bind plug on channel 3. I got one of the old ones I have and binded it then went to the new ones and noticed what I was doing wrong.

Oscar

[tlandauer]

That's fine, I'll get them out tomorrow. It can be a little confusing with the way they have the label, I initially had issues because I was putting the bind plug on channel 3. I got one of the old ones I have and binded it then went to the new ones and noticed what I was doing wrong.

Oscar

Receivers came back and thank you for putting the bind plug where it belongs. I had no trouble binding them, and to think I was stumped for MONTHS!!!
Thank you again for your generous help!

[boilo56]

An other good thread!! Good info! Thank you all!!

[oscarel]

Receivers came back and thank you for putting the bind plug where it belongs. I had no trouble binding them, and to think I was stumped for MONTHS!!!
Thank you again for your generous help!

No worries Tim and glad they worked!! The same has been done for me and I'll do what I can to help others as well. That's part of what makes this a great forum!

Oscar

[tanasit]

Enjoy reading and useful info indeed.

[NativePaul]

This is such a nice forum, it has restores my faith in humanity when i read threads like this.

Well done gents.