How do they compare? Say you have a 1515 castle and a 1515 neu, same kv....does the neu outperform it? I know they are kind of together, but a neu motor and a castle motor look totally different.does the neu have higher quality windings an rotor or are they basically the same? What the difference? Besides being finned lol
Castle vs neu
Collapse
X
-
Good to know I was saving money! LolOriginally posted by Rumdog View PostRegardless of actual design, and components, the castle versions work just as well, and will last just as long32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Comment
-
Performance wise, I haven't noticed the difference between the two either. Have you run any of the Tacon motors from Hobbypartz ?. I would sware castle has something to do with them with the way they perform.....Last edited by gsbuickman; 05-06-2014, 03:13 PM.
Comment
-
Tacon motors are extremely inefficient and have nothing to do with Castle.Originally posted by gsbuickman View PostPerformance wise, I haven't noticed the difference between the two either. Have you run any of th e Tacon motors from Hobbypartz ?. I would aware castle has something to do with them with the way they perform....."There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Comment
-
Unfortunately I dont at the moment. Idk how anyone can say they're inefficient. I had half a dozen I ran side by side with my castles & they ran just as fast and efficient in my 1/8 & 1/10 truggies,buggies & mt's.....Originally posted by kfxguy View PostHmmmmm. Do you have any of these tacon motors? If so, if like to see the innards.
Comment
-
I'll rephrase.....In a boat they are inefficient. Loads must be kept at an absolute minimum or they overheat.
Only a few runs on this one, still works, but coming apart. The rotor makes for a great refrigerator magnet though.
"There's nothing else I really want to do other than get up and build boats." - Mike Fiore
Comment
-
Nasty! LolOriginally posted by Rocstar22 View PostI'll rephrase.....In a boat they are inefficient. Loads must be kept at an absolute minimum or they overheat.
Only a few runs on this one, still works, but coming apart. The rotor makes for a great refrigerator magnet though.
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Comment
-
I had a tacon. After 5 runs the armature exploded into about a million pieces.
My castle has not.
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...
Comment
-
Sounds like I should stay away from those lolOriginally posted by Luck as a Constant View PostI had a tacon. After 5 runs the armature exploded into about a million pieces.
My castle has not.
Sent from my iPhone using Tapatalk32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Comment
-
Castle vs neu
Well, I had one in an on road car and it worked very well.
Didn't fair so well in my boat
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...
Comment
-
Two different tacon motors I should point out.
The one I put in my boat was brand new.
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...
Comment
-
Originally posted by Rocstar22 View PostI'll rephrase.....In a boat they are inefficient. Loads must be kept at an absolute minimum or they overheat.
Only a few runs on this one, still works, but coming apart. The rotor makes for a great refrigerator magnet though.

Funny you bring that up here's my graveyard of motors that didn't explode in there can lol
Careful they'll pinch your fingertipsAttached Files
Comment
Comment