getting ready to place a order for a different prop, and do some tunning
Castle 1800kv in geico
Collapse
X
-
Yeah thats a huge difference in prop. Im going to be running similar RPM in my riversport cat and was planning on a m440...what were you running for esc with this setup blackcat?Originally posted by blackcat26 View PostRan the same motor in mine on 6s with no trouble. You might be a little aggressive on your prop selection. I was running a m440.
To the OP: That is a lot of prop to push at that RPM, especially with a 125A esc. I bet that setup pulls a lot more current than you think. Once you get over 35,000RPM its hard to keep current spikes down.
Comment
-
yes, im running a 125 amp esc and checked my order and lucky me .......i ordered a x442, that should help this problem, my goals?.......im wanting to hit some high 50s with the boat and have some cooler temps, its just a play time hobby so im not racing, im just curious what i can push thru it and get the max out of it without damage. I want at least 5 minutes run times
Comment
-
Comment