castle 2028 monster motor

[Brushless55]

Would this motor work well in a 51" mono ?

YES!

[Brushless01]

Very cool might put one of these in my Rio instead of my 1717 motors. Would I be able to use the stock Rio prop ?

[video200]

any idea if this motor would push a shockwave 55 with a 70mm prop on 7 or 8S ?

[Brushless55]

any idea if this motor would push a shockwave 55 with a 70mm prop on 7 or 8S ?

on 8s with the right prop your SW55 would kick!

[video200]

i already have 5 X 70-72mm props and dont realy fancy the exspence of getting new big props.
would be fun to try for shure.

[Punisher 67]

A 70mm prop I would say would push that motor a little to hard for its liking , I would start with a 55 - 57mm then work my way up .

[Steven Vaccaro]

I have 4 left in stock.

[Steven Vaccaro]

I've delt with Dan a kd and he is kinda a joke
the reason they are so similar, is possibly they are built by the same company

Dans a good guy. He's been helping guys with low budget, high power setups for years. Far from a joke in my opinion.

[video200]

thats just it Punisher. i dont have anything inbetween 47 and 70mm. so i guess it wil have to stay a gasser for the time beeing sinse i cant se my self working up my prop collection 55-67mm at around $60 each s\b and shipped

[Make-a-Wake]

Dans a good guy. He's been helping guys with low budget, high power setups for years. Far from a joke in my opinion.

Dan's been very helpful and informative to me as well............................

[Brushless55]

Dans a good guy. He's been helping guys with low budget, high power setups for years. Far from a joke in my opinion.

I have some emails from this guy a while ago that says something totally different..
maybe in the past year he has changed?

[Punisher 67]

thats just it Punisher. i dont have anything inbetween 47 and 70mm. so i guess it wil have to stay a gasser for the time beeing sinse i cant se my self working up my prop collection 55-67mm at around $60 each s\b and shipped

Can I make a suggestion

I have a Neu 2230/1Y powered Sniper and use a Octuro X455/3 with awesome results . I would estimate the 2028 to be close in power

[Make-a-Wake]

Castle specs say 30k rpm's max for the 2028............10s = 32760 @ 4.2v per cell. I guess 10s with voltage dip and load would be high 20's.................

[Brushless55]

Guys...call me from now on. I've been out the past month for the birth of my son, but will be back in after the 1st of the year. I'm "the boat guy". I've known for MONTHS that these will be a GREAT motor for large FE boats, and have been discussing it with my sponsored drivers. The kv, size, and weight are perfect. I'll be trying one on 8s first, then 10s when it warms up a bit in a 43" mono, and a 40" hydro. I'll be running Hydra ICE 160's in both so I can datalog and check amps, volts, watts, etc. We'll DEFINITELY need a cooling jacket for this one!

From Castle
it should sing on 10s

[video200]

Can I make a suggestion

I have a Neu 2230/1Y powered Sniper and use a Octuro X455/3 with awesome results . I would estimate the 2028 to be close in power

of course you can punisher. i am sorry if i made it sound othervise mate that was not the intention.