Originally posted by Flying Scotsman
View Post
Is that what you were looking for?
-
The hexes on each of the three rods are threaded left and right hand thread, so you can lengthen and shorten the rods by turning the hex (without removing them). By turning the hexes you change the rod length and in turn change the strut angle.
Is that what you were looking for? -
Guys, I just spoke with Lowe at MHZ and I want a white hull. He has yellow in stock and is willing to shoot a batch of white if he has enough interest. Can you let me know if you guys are looking for white Dragon ladys?
Thanks,
JerryFountain KOS P1, Formula Fastech, 37 Fightercat Daytona CF twin
Pulled by Slash 4x4 tow vehicalComment
-
This strut would look good as well http://www.mddracing.com/Home_ban_Ls.htm click on hardwareBrisbane,QLD, AussieComment
-
The Castle 1717 arrived in France, MHZ Dragon Lady Fountain should be at home at the end october
I was looking to MHZ Racemaster but I really like de Fountain design, what do you suggest for the rudder: center or on the right side? Or may be two rudders?
*
Last edited by Alfa Spirit; 10-23-2010, 08:03 PM.Comment
-
What do think about MTC PowerTrimm V for the Dragon Lady hull? See attached file
Length = 90 mm / 3.55"
Thank youComment
-
Alpha,
The MTC powertrimm V is very nice. I would invest in one if they were easy to buy.HPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:
Comment
-
Yes westbeach this is a nice part, price is double than a chinese stinger. I don' t know if the lenght is correct for this hullComment
-
Alpha, yes the pwertrimm is too short for the fountain hull, you need at least 10cm length for the fountain like this https://www.mtc-powerboat.de/index.p...n=13&produkt=1
Originally posted by Alfa Spirit View PostHPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:Comment
-
The difference of lenght between those 2 parts is only 1cm. I' m not sure this is important, this centimètre is expensive
Lenght of stinger is approx. 10% of hull' s lenght, is it right?
How many rudders? One or two,Last edited by Alfa Spirit; 10-23-2010, 10:44 PM.Comment
-
The motor arrived, it' s big and magnets are very strong, a nice motor for low price, good deal
Comment
-
very nice man!
I have one of those ging into a Outlaw OBL
http://forums.offshoreelectrics.com/...ad.php?t=19194.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
What is the lenght of your Outlow? I will run the 1717 with 5S 2P parallelComment
-
The Outlaw is 39" and I'm going to start with 5s2p, then get some 6s packs and run 6s2p...NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8sComment
-
I just got done installing my 1717 in my 40" fountain Vee!NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Do you have pictures?Comment
Comment