Seaking 180 Possibly Blown?

[6sHyper]

i would highly recommend switching out those ec5 connectors for some bullets, 5.5-8mm

[Shaun78]

i have alot of EC5's but if i have anymore issues then maybe i will switch...

[Shaun78]

Like u said Dan, NO way i got a lemon from you. ITS AWESOME but u know S%$& Happens. I might order a mnew one anyways (for a spare)

[scoota]

Guys disconnect the BEC , i have 3 of these ESCs & i never run the bec on 4s or 6s, i have them in boats drawing 200+ AMPs & never had an issue . Well apart from the LVC which we all know about ...

[Bigbore]

Guys disconnect the BEC , i have 3 of these ESCs & i never run the bec on 4s or 6s, i have them in boats drawing 200+ AMPs & never had an issue . Well apart from the LVC which we all know about ...

Could you explain something about the LVC?
I've been using the Seaking 180A ESC on 5S with external BEC from a couple of month and I have the feeling that my ESC cut the power at 50% (LVC) above of 3.2V as programmed.

[scoota]

Could you explain something about the LVC?
I've been using the Seaking 180A ESC on 5S with external BEC from a couple of month and I have the feeling that my ESC cut the power at 50% (LVC) above of 3.2V as programmed.

At 3.2 volts it was cutting in to early , i have found setting it at 2.8 volts on my high draw set ups my batteries were coming back with a 1000 mah left in them , i have read a lot of people have been turning off the LVC to over come this issue , or you can run a external LVC .