What's your favorite ESC?

[RandyatBBY]

I'm waiting for the mail to deliver two mamba monster 2 ... I'll try to cool them with water.
I understand that you already managed to make the modification in MM2? Did you manage to test them with the 1515 engines in a 30 "/ 35" hull?

I ran the MM2 with a 1515 1Y and a 445 prop in a sport hydro, 29 inch. no problem I used a old cooling plate from a old Traxxas Spartan ESC and a BBY made one. remember to use a heat transfer paste between the cooling fins and the plate. I also used the plastic fan attaching case to hold the cooling plate on the ESC.

[RandyatBBY]

Now you've got me wanting to chuck the Sidewinder up in my mini mill attachment for the Taig lathe. Mill those fins off and make a cooling block.

Stop giving me ideas, lol.

I would not do that the fets are too delicate and do not want to damage them. Just put the plate over the fins with heat transfer paste.

[golfito]

Many thanks Randy!
Search for images on the web. I also found a driver that could serve.

Http://www.arcticsilver.com/as5.htm

http://www.arcticsilver.com/cmq2.html

http://www.arcticsilver.com/arctic_alumina.htm

[robw]

This one

not tried it yet but for the amount it cost, has to be my favourite.

[ray schrauwen]

I would not do that the fets are too delicate and do not want to damage them. Just put the plate over the fins with heat transfer paste.

Thanks again buddy!

[tjcast]

[Keagan-Z06]

This one

not tried it yet but for the amount it cost, has to be my favourite.

Those things are gorgeous, wish they were smaller and more affordable.

[jaike5]

Sch. 40/160. Have 5, always looking for an other!!

[RandyatBBY]

Those things are gorgeous, wish they were smaller and more affordable.

Look at the MGM TMM 25035-3 for Race Boats X2-SERIES LITE or MGM TMM 28026-3 for Race Boats X2-SERIES LITE

[Lone-Wolf]

Look at the MGM TMM 25035-3 for Race Boats X2-SERIES LITE or MGM TMM 28026-3 for Race Boats X2-SERIES LITE

I picked up two MGM 28026's recently for $270 USD each, not bad for 280 amp continuous controllers, yeah not cheap but not too far out of the ballpark for top quality and service. Base price is only $240 USD.

[Pilot-Werx]

Where did you find them for that price?

[ray schrauwen]

I picked up two MGM 28026's recently for $270 USD each, not bad for 280 amp continuous controllers, yeah not cheap but not too far out of the ballpark for top quality and service. Base price is only $240 USD.

Take care to use some strain relief for the leads since I've seen one fail long ago because of neglect. The wires for input frayed and caused a short cct.

[RandyatBBY]

Take care to use some strain relief for the leads since I've seen one fail long ago because of neglect. The wires for input frayed and caused a short cct.

I have seen water proof receivers with corrosion on the connectors go wild. A little CorrosionX will fix all electronics.

[Lone-Wolf]

Where did you find them for that price?

https://www.mgm-controllers.com/race-boats/speed-controllers-escs-1/tmm-28026-3-for-race-boats-x2-series-lite.html

[RandyatBBY]

It seams every time I look at the price at MGM it is one thing, then I save up and it is more.