castle esc

[cybercrxt]

Sorry, I dont know anything about that motor, and finedesign obviously doesnt know what they sell..A nemisis gold is the heading, but a leopard motor is shown in the pic! First thing you need to do, break away from getting stuff from Finedesign. Maybe someone else can help. You need to drop down to an octura x445 for starters, a 645 is way to much prop. I also do not care for prather props..if they are the stainless version, they are too heavy. I don't think those batteries are up for the challenge either. Not sure what a t240 might be?

[ahbeating79]

2 3s 6400 mah 25c not 1

[srislash]

2 3s 6400 mah 25c not 1

So you are putting them together parrallel to make 3s2p? You described 6s.On my 2200kv's I really only run 4s.On occasion have done passes on 5s but 4s is is movin'.

[ahbeating79]

I have run the 645 on my spartan wit a 80hv seaking esc with no problems at all with 20c 5400mah vemon packs

[cybercrxt]

To be honest, before blowing up that nice upgraded esc, I think you need to really sit down, read, and learn about setups, lipos, and lipo safety. I can tell you are new to this stuff, and you will continue to burn up, spend money, or possibly get hurt. You are trying to run a big setup, but with minimal knowledge. We can try and give you some pointers here, but you really need to just kick back and read as much as possible. Mike

[ahbeating79]

No series for 6s and I'm going to run a 1600kv

[ahbeating79]

I have run the 645 on my spartan wit a 80hv seaking esc with no problems at all with 20c 5400mah vemon packs

[ahbeating79]

Thx u for the advise I been reading and studying lips and brushless and joined sites like this one for more knowledge so I will study up be for I put together my sp gensis cat. My spartan seems to be doing fine with the hv80 seaking and 1600kvmotor on 6s GPS 54mph