ESC's For twin Castle 2028

[mikem1234]

Hey guy's I had two CC 200 HV on order but now with this new recall I'm thinking I should spend my money elsewhere, also I never had any luck with CC mind you they always fixed them under warranty for me. I'm building a Hydrolift 1900 with twin CC 2028 motors on 10s so any thoughts on good controllers and props would be appreciated.

Thanks
Mike

[Make-a-Wake]

I use Swordfish 240 HV's with my 2028's and they work flawlessly.

[mikem1234]

Can you get them here at OSE?
Any thoughts on props?

[Rumdog]

What size is that cat? Must be a huuuge beotch! I'd run at least 60mm props to take advantage of that power.

[Rumdog]

I've also had good luck with the Swordfish HV 240 running a Neu 2215.

[carlcisneros]

the new fightercat 16S 200A HV esc's are very good.

[mikem1234]

The cat is 1900mm. Where can I buy the Swordfish it's not in stock here.

[mikem1234]

Thats 74 inches of goodness.

[chummer]

The cat is 1900mm. Where can I buy the Swordfish it's not in stock here.

email Steve at OSE and ask him when they will be back in stock. Probably won't be too long before he has them.

[mikem1234]

will do!

[m4a1usr]

the new fightercat 16S 200A HV esc's are very good.

Based on the reports from the folks running them I agree. But right now you might want to stay glued to the comments Ben has going in his thread on Rumrunner. Still,..with FighterCat going where they are with ESC's. His products stand a chance of being the new standard or American version of "Shulze".

John

[mikem1234]

I'll check it out thanks man!!

Based on the reports from the folks running them I agree. But right now you might want to stay glued to the comments Ben has going in his thread on Rumrunner. Still,..with FighterCat going where they are with ESC's. His products stand a chance of being the new standard or American version of "Shulze".

John