Yeah but the Ice can tell you EXACTLY what your setup is doing 
-
Team Liquid Dash -
DJI Drone Advanced Pilot
CanadaComment
-
i have been using the built in bec even though its not recommended..and raydee i really do want an ice 200hv real close to buying one last night..i just hope it lasts long enough to tell me that my setup is too hot!"FE" STANDS FOR FRUSTRATING EXPLOSIONS
Comment
-
That sucks! Have you diagnosed what happened? Looking at the whole setup the big ole 447 seems to possibly be the culprit.Originally posted by LiPo Power View PostI have DF-33, Neu 1521 1.5D motor (1900 KV), Octura X447/3 blade, 4S2P, 5000mAh, 40-50C and my new Turnigy 180A ESC just fried, who knows why.... Not happy....
Also got delivery of brand new:
and it won't beep at all, lemon..... Not happy.....
Robert
BTW.........just walked back in the door from a hard run with a 180a.................barely warm. I am also running the internal BECNEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
The Ice 200 is not an HV. HV ICE only goes up to 160. The Turnigy/Hobbycity doesn't even comes close to the features the ICE series have.If all of your wishes are granted, many of your dreams will be destroyed!Comment
-
What are the features?Originally posted by BakedMopar View Post.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
I know the 1521 1.5d loves the 447/3, it can take more.Originally posted by Make-a-Wake View PostComment
-
It has full adjustment of timming and throttle curves which is adjustable in 1 degree Intervals. Even the lvc is adjustable in .1 volt incraments. It has a BEC that you can actually use up to 8s (standard models) and is also adjustable for power output. You have firmware updates. You also have a full data logging. This alone to me is worth the money. You don have to deal with a piggy back system.If all of your wishes are granted, many of your dreams will be destroyed!Comment
-
-
I got my 180 and the programming box. I can't seem to download the faceplate from HK anymore. It may have the new one on it as I do not have anything to compare.
How easy is it to program?
Andym...did this have the right faceplate on it?
Cna anyone give me a quick 1-2-3 on prgramming this beast?Comment
-
Jeff if you have the esc instructions it shows the flow chart. Plug in the esc input harness in the box and connect a battery to the esc. You will then have item and a value number. Using the flow chart it shows what each number will designate. I'm not a home to give you an exact but that hopefully is enough to get you startedIf all of your wishes are granted, many of your dreams will be destroyed!Comment
-
Cool...I do have the manual but knew many of you have set them up. I will do that...I am out as well but sounds easy enough! Just need a 2S battery pack to hook up?Comment
-
That's how I normally program mine with the 2s. You can program
1. Forward Forward/reverse
2. Cell count
3. LVC
4. Timming
then for each item stated above there's different values.If all of your wishes are granted, many of your dreams will be destroyed!Comment
-
only 1p right now but 2p will be coming soonOriginally posted by JMSCARD View Post"FE" STANDS FOR FRUSTRATING EXPLOSIONSComment
-
programming box faceplate for the marine turnigy 180Originally posted by Jeff Wohlt View PostTwin Cat 135, Sprintcat40 (single-twin), DF 35", Maritimo, Mean Machine, SV 27
http://www.rcfastboats.com/Comment
Comment