Turnigy 180 with a NEU 1521 1y on 6s?

[JMSCARD]

What do you gents think of running a Turnigy/Seaking 180 amp esc with a NEU 1521 on 6s in a 33" real delta force? and what prop should I run..... also can I run 40c turnigy 5000mah 3s lipos in 6s1p format or should I only run her on 6s2p?? Help....

[agressive1]

Im going to be running a 1527 1Y on my Seaking 180 in a 37.5" mono hull on 2x 6s in Parallel with a Octura X646 to start of with.

[Make-a-Wake]

I run a 1527 1y in a 45" mono with a turnigy 180a and an x445............ESC is barely warm(motor is darn near cool!) They are good ESC's.

[JMSCARD]

I burnt up a 200 amp himodel in the boat... I think it was because it was hopping in the turns..... I guess Ill go with installing turn fins and putting the turnigy/seaking in..... thanks for the advice... the 1521 1y is 1550 kv.... so you guys say the x445 which is what I was running when the himodel went... will be fine?

[Make-a-Wake]

If you have an extra 442, i'd try it first..........but the 445 may work.

[JMSCARD]

If you have an extra 442, i'd try it first..........but the 445 may work.

I do have a few nice x442's will try one before the x445 on the 6s with the turnigy first... the x445 was ballistic.... very very fast.... I'd estimate 60mph.....

[Brushless55]

I run a 1527 1y in a 45" mono with a turnigy 180a and an x445............ESC is barely warm(motor is darn near cool!) They are good ESC's.

Is this the esc you are talking of?
wow, big motor on it..

http://hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=8937&Product_Name=Turnigy_Marine_180A_Brushless_Boat_ESC

if so I keep hearing great things about this esc

[JMSCARD]

Is this the esc you are talking of?
wow, big motor on it..

http://hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=8937&Product_Name=Turnigy_Marine_180A_Brushless_Boat_ESC

if so I keep hearing great things about this esc

yup I have (4) of them and one of the Seaking 180's which is the same exact thing with a different name on it.... great esc's so far... I've never had one hot and I've ran some pretty hot setups in them on smaller boats... just never as big as a 1521.... plenty of 1515's though on 6s..... great esc with super smooth throttle response and easy to program... only drawback at all is that they are fairly large but lets face it.... it is a 180 amp esc for less then a $100....:)

[Make-a-Wake]

Is this the esc you are talking of?
wow, big motor on it..

http://hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=8937&Product_Name=Turnigy_Marine_180A_Brushless_Boat_ESC

if so I keep hearing great things about this esc

Yep thats it, and its a brute. Big 10 gauge wires and three 35v 1000uF caps. When i log in at hobby city the price is a paltry $77! Biggest bargain out there. I have two myself.

[Brushless55]

That is killer!
so when I power my twin 1515 Hydro or Cat, these 180's on 5s should work with no sweat!

[RIPFENCE]

i have been running the 180 with the neu 1521 1577 on 6s with m645 prop in my cyberstorm..temps are between 110-120 so good so far...

[Make-a-Wake]

That is killer!
so when I power my twin 1515 Hydro or Cat, these 180's on 5s should work with no sweat!

It wont even break a sweat! Hopefully they are only $77 for you as well!

[Brushless55]

It wont even break a sweat! Hopefully they are only $77 for you as well!

yes, $77.73

[LiPo Power]

I have DF-33, Neu 1521 1.5D motor (1900 KV), Octura X447/3 blade, 4S2P, 5000mAh, 40-50C and my new Turnigy 180A ESC just fried, who knows why.... Not happy....
Also got delivery of brand new:

http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=10626&Product_Name=Turnigy_AquaStar_120A_Water_Cooled_ESC

and it won't beep at all, lemon..... Not happy.....
Robert

[RIPFENCE]

i now have three boats running the seaking 180 with castle motor and or neu motors..the 180's have been great..i am really starting to believe in these things..in higher current draw situations up to 6s its tough to beat these esc's..i cannot bring myself to buy another hydra..the price does not make sense to me...however i would like to try an ice 200hv..but wait a second..i can buy two 180's for the price of the ice 200..now i am really thinking with my dipstick...i wish i could buy a 6 pack of seakings..or even an eggbox dozen...