Turnigy Monster 2000 help

[RandyatBBY]

While I have been building my 1/8 Pro Boat I have been working on a friends boat that will be running in the district. It is a Dumas Circus Circus 1/8 wood kit, with my HWD. the KB motor, a Turinegy Monster 2000 esc on 8S2P Turinegy cells.
I just tried out the ESC and I can not get it to reverse. I reversed the servo in the transmitter in throttle. position to reverse. Nothing happened. I had done the initial start up in reverse. I tried to shut off and re calibrated it nothing changed. I still comes on when you break it.
Pictures of the boat and parts thought you all would like to see.

[Flying Scotsman]

Randy have you programed it with the specific program card for that ESC

Douggie

[RandyatBBY]

Randy have you programed it with the specific program card for that ESC

Douggie

No, I do not have one.

[m4a1usr]

I'm trying to sort the sequence out here Randy. Your trying to reverse the throttle setting on the ESC? Instead of just switching 2 motor wires? That speedo does not have a reverse setting if you are seeking a forward and reverse setting like some do. I know I'm not getting it to really be of any help.

John

[RandyatBBY]

No, not the diredtion of the motor. The direction of the throttle, from full on to full break it works correctly.
I want it to go from netural to full on normal. I think I need a Pisitx to start off with after wright ing this.

[RandyatBBY]

I just installed and RC Hydros Pistix and it works correctly! good news. Now I have to get some more for my friend.

[Mel279]

Pictures of the boat and parts thought you all would like to see.

[/QUOTE]

hey Randy

Is that a watercooled outrunner motor?its look so big

[RandyatBBY]

Pictures of the boat and parts thought you all would like to see.

hey Randy

Is that a watercooled outrunner motor?its look so big[/QUOTE]

Yes it is, I have two to sell and one in my Pro Boat.

[NativePaul]

How do you keep it watertight with the strut on the inside? any close up pictures, i had assumed a fixed strut attached to the bottom, but that looks like a regular adjustable strut just attached to the inside of the transom rather than the outside.

[RandyatBBY]

RTV sylcon on both sides of the bottom and deck tape on the top check out my Pro Boat build it has pictures.

[Adrianli]

Hi Randy,

I am interested in this motor also. May I know the KV of this motor??? It looks similar to the one Littlescreamers are selling.

I am running a NEU 2215 2Y motor with 750kv wif a Octura X455 prop and 10S lipo.

What would you suggest the prop size to go with this motor?

[RandyatBBY]

Hi Randy,

I am interested in this motor also. May I know the KV of this motor??? It looks similar to the one Littlescreamers are selling.

I am running a NEU 2215 2Y motor with 750kv wif a Octura X455 prop and 10S lipo.

What would you suggest the prop size to go with this motor?

Yes I am a little screamer dealer. This motor has 650Kv I have two in stock, about ready to test in a 1/8 Pro Boat.

[slyman]

What ESC did you use and will it handle 6s?

[Jesse J]

thread here seems to be off topic of OP, but I didn't want to start another thread on this ESC.

Does anybody know if it can be programmed with the TX? I have an order on programming card, but out of stock...

Anybody have a digital set of instructions or know what the default settings are?

thanks
J

[Flying Scotsman]

Jesse, Yes, but you do need a Pistix. I will hunt and see if I have the instructions and will email them to you, if you wish

Douggie