charging 10s2p

[urbs00007]

buying a generator, probably 2000 watts to charge my lipos. i will have 2 sets of (4) 5s 5000mah 70c revos. i have a cellpro 6. what do you recommend to charge these 4 batteries as quickly and safely as possible? i know i need a 24 volt power supply. what else do i need? thanks

[srislash]

I am not familiar with the cellpro but a good power supply is Hewlett Packard. Yes computer server power supplies. I run two in series for 47amps @ 24volts. They are whisper quiet and run fore ever.

[TRUCKPULL]

It is NOT as simple as connecting two 12V units in series.

You have to float the ground on one of the units first.

Larry

[urbs00007]

charging

I am not familiar with the cellpro but a good power supply is Hewlett Packard. Yes computer server power supplies. I run two in series for 47amps @ 24volts. They are whisper quiet and run fore ever.

yes, i have one. but i need 1 more to make 24 volts. anyone know where to get one? lipo power cant make anymore.

[srislash]

E bay and we can help with the ground and wiring in series.

Thanks for the reminder Larry.
Shawn

[urbs00007]

charging

E bay and we can help with the ground and wiring in series.

Thanks for the reminder Larry.
Shawn

thanks for your help. can you tell me how to find it on ebay? i cant seem to find it. thanks, john

[srislash]

thanks for your help. can you tell me how to find it on ebay? i cant seem to find it. thanks, john

Here is one lot: http://www.ebay.ca/itm/LOT-OF-3-HP-P...oAAOSw2xRYepsL

And it is with all these: http://www.ebay.ca/sch/i.html?_odkw=...upply&_sacat=0

Just watch shipping prices and I would match up the model numbers or get two new ones. If you can wait till tomorrow evening I'll get you the model number off mine. Then you can wire it up just the same.
All you would need is a solder iron.

Actually I see somebody is willing to help in the other thread as well.

[urbs00007]

charging 10s2p

E bay and we can help with the ground and wiring in series.

Thanks for the reminder Larry.
Shawn

hi shawn. i purchased another power supply. can you let me know how to wire for 24 volts? thanks, john

[srislash]

hi shawn. i purchased another power supply. can you let me know how to wire for 24 volts? thanks, john

Hopefully you got the same as I have and we can just copy mine. I think that is what you were after
model DPS-600PB B ?

[urbs00007]

charging 10s2p

Hopefully you got the same as I have and we can just copy mine. I think that is what you were after
model DPS-600PB B ?

hi shawn, yes i ordered it from la power systems in california for 45 shipped. showed them the picture i posted in this thread. can i just connect in series or do i need to do something special with the grounds? thanks, john

[srislash]

Shoot me your email in a pm and I'll give you a pic of what mine is