HYPERION 720i powersupply?

[Peacock8]

Hello, I have 4 4S nanotech turnigy 45-90c 5000mah batteries I want to charge pretty fast. Looking into buying a new charger.
I hear that the Hyperion chargers are some of the best out there. But what power supply do you guys use on it?

I would like to charge at least two batteries at the same time. Is that possible?

Ørjan.

[Doug Doty]

Look in a near adjacent thread for what looks like a good answer to your question, ....." Best Charger "...... Hyperion 720 duo or Powerlab8 from FMA Direct for chargers are the top two on my list for chargers, I like the option offered in the thread mentioned above for a power supply.

[sailr]

Look at http://forums.offshoreelectrics.com/...ything-Changed

Power supplies from www.feathermerchantrc.com Best deal on the planet. I have two of their 47A supplies in series for 24V to drive the new Hyperion 720 duo to it's full potential. My setup is shown in post #13 in the above thread.

[Peacock8]

Thanks for your replies :) I saw those power supplies your talking about sailr. Looks good and cheap.

[Peacock8]

I found this one. It´s Mean Well, so its a good brand. I realize it´s over twice as expensive as the other psu that´s linked to. But I went for this. I´ll let you know how it turns out when i get to test it :)

http://epbuddy.com/index.php?main_page=product_info&cPath=5&products_id=71

Ørjan.

[d.a.v.e]

I bought this one for mine and works real well but its a bit loud for me. Hard to have it running in my office and on the phone at the same time But I can charge my 4s packs at 10amps concurrently.

http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_500wt_1195

[burgerchow1]

I use protec super 1000 from amain. Expensive, but is 1000 watts, 40 amps, and can go up to 30 volts, which you will need if you want to maximize the charging capabilities of the Hyperion 720 duo or the new thunder power high end charger. These new chargers can charge at 5c but require 24 volts power source. I can charge a 5000 mah 4 cell in 10 mins