have another 2s pack. one cell reads 4.10 and the other 3.30, any way to fix this?

[dana]

as the title says..... is this one junk too?

[sailr]

discharge the pack down to 3.2V per cell and then balance charge to see if they will come up equally.

[dana]

that pack is so far off, i just went and got another pack at the lhs. that pack went into a bucket of saltwater. dont really wanna take any chances over 50 bucks

[eboat]

Some times if the wires in the balance lead are a little crusty it will look like there is a differance in the voltage in the 2 cells but it is just poor contact in the balance conector giving it a poor reading
Should check the voltage on the main pack red and black wires and see if it adds up to the same as your balace lead readings

[dana]

well i will say that at one point over the summer that pack came back with a temp of 160 which was fishy. it never seemed to charge very well after that happened..... oh well the thing is done as far as im concerned

[sailr]

Correct! Best solution! Good for you!

that pack is so far off, i just went and got another pack at the lhs. that pack went into a bucket of saltwater. dont really wanna take any chances over 50 bucks