Originally posted by LiPo Power
View Post
-
It's not worked out anyway, The thing won't take the stuff and it's not stuck to the bit.... Lol! No, I gave it a go and now just wait to see if I can get a cell from the manufacturer....HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin one -
That white metal is aluminum.
Glad to hear you decided not to.
AndySpektrum Development TeamComment
-
-
Ha! I thought I might be somethin a little more exotic!? Oh well...Originally posted by AndyKunz View Post
I'm glad for this forum and guys like yourself that take the time to help out dumb ass guys like me!
Thanks for the advice. :-)HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
On one hand you could be cheap and save money or on the other hand.........
......wait..............
....Where's my other hand? Not funny.
READ THIS KIDS, DON'T TRY IT!IMPBA: 7-Time FE World Record Holder "Don't think outside the box. Rather, refuse to admit that the box exists in the first place!"
MGM Controllers - Giant Power Lipos - ML Boatworks - Wholt's Wire Drives & Struts - Nano-Oil
Comment
-
No, that is funny.... On the same time so truth......
There was a post here on OSE a while ago about one of our friends loosing house and all becouse of LiPo issue. Can not remember if this was resoult of playing with LiPo or charging issue but the buttom line is they are what they are and we just have to remember that....
shorting it with knife.....
Robert
Originally posted by Meniscus View PostDJI Drone Advanced Pilot
CanadaComment
-
I know what a Li-Po can do to a boat, one ripped through one of my boats and all I could think about was.... car, house, car house....Originally posted by LiPo Power View PostNo, that is funny.... On the same time so truth......
There was a post here on OSE a while ago about one of our friends loosing house and all becouse <a onMouseOver="javascript:window.status='of lipo';return true;" onMouseOut="javascript:window.status='';return true;" href="http://thebigsvc.info/?v=4%2E03&ss=of+lipo">of LiPo</a> issue. Can not remember if this was resoult of playing with LiPo or charging issue but the buttom line is they are what they are and we just have to remember that....
shorting it with knife.....
Robert
Now I keep them in steel boxes and charge in Li-Po safe bags.....
Thanks again guys...HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
I don't understand why they didn't do it at a distance. Stupidity at it's best.IMPBA: 7-Time FE World Record Holder "Don't think outside the box. Rather, refuse to admit that the box exists in the first place!"
MGM Controllers - Giant Power Lipos - ML Boatworks - Wholt's Wire Drives & Struts - Nano-Oil
Comment
-
Quote, This stunt was performed by highly skilled idiots. un-quote!Originally posted by Meniscus View PostHPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
you cant fix that tab, they use very special solder on those aluminum tabs- scrap it and make a 2-3 cellComment
-
I have resoldered a main feed that came off a tab once!
Yes that is once. It was not a success for very long and I was not keen to have another go at it.
Read the Lipo disposal thread and follow the guide lines.
Buy a new pack, job done. I did.
It has now been covered exstensively and I think it needs no further reiteration.
DO NOT FARK WITH A LIPO !! unless you are a very experienced tech in this field.
Burns are no fun and then heal with scars, blindness is forever.See it....find the photos.....sketch it it....build it........with woodComment
-
No solder at all, The copper tab is fixed with a sonic welder. 3S it is.....Originally posted by 6S HYDRO View PostHPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
I would not do anything like this without being armed with several things....Originally posted by Simon.O. View Post
1, Correct PPE.
2, A fire extinguisher.
3, Technical ability... As I have said, I am anengineer and I do understand the dangers of such items. However, I also hate thouwing away something that can be fixed. In this case, I am loosing one cell and now have a 3S, not what I wanted but better than nothing....
As you say Simon "It has now been covered exstensively and I think it needs no further reiteration"
Thank you to all for the input.....
David.HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
in order to solder the tab back you would need special solder called aluminum pasteOriginally posted by killerdave View PostComment
-
I can't wait for Lipo to get cheaper all around so guys aren't willing to risk their lives to save packs
Comment
Comment