P Spec rigger build

[RandyatBBY]

That is right a New P Spec rigger with old tried and true parts. The tub is from the SAW rigger and the Sponsons are the tried and true oval sponsons . This boat has been done in FG and Milled CF to be strong and inexpensive, but trick!
I will show the build as it goes threw the concept stage first, the tub and sponsons layed out to get the idea.


Booms installed and the boat is a 30 inch boat that will handle water like a 35 incher but a lot faster.

I have a little more work done.

All Parts are Epoxied

Strut is setup ready for rudder

Rudder mount built

[Rumdog]

SOOOO sick looking!

[HOTWATER]

Is that an AC UL-1 Motor? Very cool rigger Randy!!

-Kent

[RandyatBBY]

Is that an AC UL-1 Motor? Very cool rigger Randy!!

-Kent

Yup! It ias the one I got from Bustitup. Thanks

[RandyatBBY]

Nice shot of the rear of rudder bracket.254 X 727 X 1.401

Another angle

Motor cooler and mount with end bell strap.

Lipo hold down strap.

Turn fin.

Fin and sponson.

[sailr]

Looking good Randy! Got another one of those turn fins! Sure would like one for my Climate Matrix Rigger!!

[RandyatBBY]

Looking good Randy! Got another one of those turn fins! Sure would like one for my Climate Matrix Rigger!!

Sure I have several in stock. $15.00 Brace is extra$10.00 I make to size . pluss shipping $5.00

[sailr]

Sounds good. I have a Climate Matrix rigger (25" tub). I can take care of the brace myself. Do you take paypal? PM me.

Thanks!
Jim

Sure I have several in stock. $15.00 Brace is extra$10.00 I make to size . pluss shipping $5.00

[RandyatBBY]

Finished base boat , ready for paint.

Inside shot

Other side.

[Brushless55]

Ah man, I think I want a rigger now!

[tylerm]

Is that your new 7075 high speed rudder randy? If so it look quite thick compared to the pic on rumrunner?

[sailr]

Randy,
She is shaping up to be a SWEET boat! Love the big tub. Will you be producing this boat for sale? Maybe also in FG as opposed to CF?

[RandyatBBY]

Randy,
She is shaping up to be a SWEET boat! Love the big tub. Will you be producing this boat for sale? Maybe also in FG as opposed to CF?

It is nice to have all the room in the tub, I think the next one I will be putting the motor a little forward if it needs it. But from what I have heard the tub has no blow over tendency's. Some day I will be putting it on my site and selling them. This is a FG Just in my lay up I use a lit of milled and chopped CF slurry to fill all the pin holes it is water tight the way it sits.

[RandyatBBY]

Is that your new 7075 high speed rudder randy? If so it look quite thick compared to the pic on rumrunner?

The rudders are .140 thick, just a little over 1/8 of a inch. And yes it is a High speed pivit.

[sailr]

Looking forward to the finished "for sale" product! Interesting that it's FG with CF bits!

I love the design and can't wait for the sea trials! Keep us posted Randy!!

It is nice to have all the room in the tub, I think the next one I will be putting the motor a little forward if it needs it. But from what I have heard the tub has no blow over tendency's. Some day I will be putting it on my site and selling them. This is a FG Just in my lay up I use a lit of milled and chopped CF slurry to fill all the pin holes it is water tight the way it sits.