In the following I want to meet a catamaran made of balsa with hardware home made
-
-
next -
From the back I balsa reinforced with ABS, there will be port propeller mounted tubesComment
-
fotoComment
-
to increase the resistance we put on a whole surface of the reinforcement fiber glassComment
-
port propeller tubesComment
-
nextComment
-
assembled and ready for paintingComment
-
final
Length= 1000mm
Width= 320mm
height= 120mm
engines = 2 x Roxxy 3656/04 , 20V, 60Amp
batteries = 2 x 5 cell Li-Po 2200mA, 33C.
ESC = 2 x HiModel Navy Fly-70-Opto, Cooling water
Propellers = 2x 42mm pitch 46 , 2 blade carbonLast edited by OldMann; 04-26-2009, 08:12 AM.Comment
-
It turned out great Oldmann! Must have been a lot of work...Comment
-
You have to be very happy with the way it turned out
Looks and works greatComment
-
Thanks for the feedback, really was a lot of work. But the satisfaction is great when you see that everything goes as you want.
Meanwhile I redid the painting catamaran and I made new couplings and tube port propeller. They will be mounted on the new catamaran that is working. Il catamaran built after the plans received from "lomdel. I will try to increase the size slightly.Comment
-
Are you still waiting for the plans, or have I sent them to you already? My mind is letting me down lately, sooo much going on here... I built mine recently and needed to adjust a few parts here and there, nothing major though...Comment
-
I have already submitted plans, only now have time to start building.Comment
-
New catamaran
I started construction on another catamaran.
I finished the propulsion and rudder.Comment
Comment