Maritimo build

[wolf IV]

I replied to your reply ...

Mr. Egneg! If your still doing props I could use a few :) Gett'n her wet again!! (X2 r/h s/b 442's w/ +2/ deg extra. and x2 l/h match)
(X2 r/h s/b detounged 442's no cup and back cut and x2 l/h match set) and (x2 r/h 447 s/b detounged 447's and x2 l/h match set) so that's 12 props in total r/h and l/h match sets. pm me the price and lead time. Thanks!!!!!

[wolf IV]

Hey man...hope you are feeling better. Can you tell me what the length of the shafts I made you are from the 6mm point to the 3/16" I have another set to build and do not have the stingers.

Looking very nice!

Jeff what's up buddy! I took some time off f.e due to finances but things are looking up again :) could you make me (X12) The 6mm part end to end is (2.514'') and 3/16 is (1.05'') drives? Ill put em together just need the shafts.

[bonewar]

BONEWAR ,WELL THIS IS WHAT CHUCK THINKS WILL WORK, HE KNOWS BEST!! LOOKING FORWARD TO GETTING THEM! THIS IS AN EMAIL FROM CHUCK TODAY : "I was thinking that I would still detongue them a bit to increase the overall pitch and cup them a bit to narrow the thrust cone along with the added 2 degrees. Who does this sound to you?"

Wolf,

That sounds very good. I think you will get there with these props. You know the drill mate , Couple of laps check temps , speed , Good luck dude .
Can you video the run for us , I love watching that Timo off yours scream across the water.

Also if they don't do the job maybe these ABC props I'm trying will do it.
I'll keep you informed what happens with them.

Bonewar

[wolf IV]

Wolf,

Ok tell us what are these new props you talk of.

Bonewar

BONEWAR ,WELL THIS IS WHAT CHUCK THINKS WILL WORK, HE KNOWS BEST!! LOOKING FORWARD TO GETTING THEM! THIS IS AN EMAIL FROM CHUCK TODAY : "I was thinking that I would still detongue them a bit to increase the overall pitch and cup them a bit to narrow the thrust cone along with the added 2 degrees. Who does this sound to you?"

[wolf IV]

Wolf,
just curious, why not run the 447's, will it pull too many amps?

Cheers...Tim.

The reason I ask is we are about to start testing my friends twin cat - 1.1 mts with twin 1515 1Y's running 5S, we have been recommended 442"s to start with and 447's. ESC's are Castle 240's.

The 1515 1.5Y on 5S has very similar RPM to the 1515 1.5D's on 4S, so prop speeds will be very close to what you are acheiving.

Thanks....Tim.

.MY BOAT WEIGHS ALOT FOR THE HIGH RPM MOTORS AND SHE PULLS ALOT OF AMPS. IM RUNNING THE HI MODEL ESC'S AND T
HEIR PROBABLY NOT AS EFFICIENT AS THE 240'S ( BUT CHEAPER).. 447'S WILL BE TOO MUCH TO RUN THROUGH A SET OF LIPOS. WOULD WORK AS A SAW SET UP BUT SPEEDS WOULDNT BE MUCH OVER MID 70 MPH IM GUESSING AND IM NOT DOING THE SAWS JUST TRYING TO SQUEEZE IN AT 70 MPH. ( PERSONAL GOAL)

[Fruity]

447's?

Wolf,
just curious, why not run the 447's, will it pull too many amps?

Cheers...Tim.

The reason I ask is we are about to start testing my friends twin cat - 1.1 mts with twin 1515 1Y's running 5S, we have been recommended 442"s to start with and 447's. ESC's are Castle 240's.

The 1515 1.5Y on 5S has very similar RPM to the 1515 1.5D's on 4S, so prop speeds will be very close to what you are acheiving.

Thanks....Tim.

[egneg]

I told egneg to just do some 442's w/ +2/ deg extra. No cutting..? Just wanna see what happens... But then i also asked him what he thought and he hasnt got back to me yet..

I replied to your reply ...

[bonewar]

Top speed for the Simrad Cat so far is 64.5 mph / 103.8 klm/h.
This is with a set of octura x442 s/b cupped.
So with the new 30c thunder power lipos and the new ABC props , should be very interesting.
I will keep you informed how those ABC props turn out .

Bonewar

[wolf IV]

Let me know how you like the props! I havent rum my s/b abc props yet as my shafts are too short for them.. Ill try them on the next set of shafts... Whats your top speed so far? dude, we will hit it!!! i know i could throw 447's on her and hit it but it would only be one pass...

[bonewar]

Wolf,

I,m still chasing the 70 mph mark with the Simrad Cat.
I've bought some ABC props 4217/3 and a set of ABC 4518/2 left and right rotation.
Haven't had a chance to try them yet , very soon!
Good luck my friend i really hope you an i can achieve this goal.
Bonewar

[wolf IV]

Ive gotten 67.1 twice now , one on salt and one on fresh both with unmatched just s/b 442's.. So maybe a little extra pitch will give me that extra! Also im running the turigy 2650 mah 50 c's and lighting it up really helped the way it road on the water! Better performance but not faster...

[wolf IV]

I told egneg to just do some 442's w/ +2/ deg extra. No cutting..? Just wanna see what happens... But then i also asked him what he thought and he hasnt got back to me yet..

[bonewar]

Wolf,

Ok tell us what are these new props you talk of.

Bonewar

[wolf IV]

New props coming !!! Come on 70 !!!

[Jesse J]

YO, where's this vid??? wanna see her fly ------------------->

Nevermind, found ----------WOW bery nice work!! best clip yet - amazing run she looks great!