Long story short i have a 90% finished hpr115,
every few years i come back to it, buy a few things get side tracked.
Im located in the UK and there isn't a fast electric scene...
I can get the boat to Florida for free and then post it anywhere stateside from FL,
I'm looking for someone to finish off the final details, setup and tuning basically..
I know it's not really an incentive as not much money to be made on a 90% built boat but willing to pay handsomely for any work / setup hours needed...
I would prefer someone with previous HPR experience and do understand things go wrong
Setup is as follows, HPR115 carbon with full HPR kit
Lehner 2250/7
AS26-XXX
SLS 40c Lipo - 6s 5000mah
x447 andy brown tongue cut
futuba 4grs
the esc, battery and remote are all brand new, the motor's are used.
Im budgeting maybe $1000 to get it completed, i've had the thing such a long time and its such a shame i don't get any use out of it, I'd like it to be somewhere near the 80mph mark and depending on the builders experience willing to take suggestions on one day going north of 100.
I've had lots of expert advice over the years on building it but even last time i finally thought it was all set on the water she had some water ingress and cut out... i've had experience in the past of seeing a boat go up in flames due to my inexperience and theirs a lot more $$ invested in this..
every few years i come back to it, buy a few things get side tracked.
Im located in the UK and there isn't a fast electric scene...
I can get the boat to Florida for free and then post it anywhere stateside from FL,
I'm looking for someone to finish off the final details, setup and tuning basically..
I know it's not really an incentive as not much money to be made on a 90% built boat but willing to pay handsomely for any work / setup hours needed...
I would prefer someone with previous HPR experience and do understand things go wrong
Setup is as follows, HPR115 carbon with full HPR kit
Lehner 2250/7
AS26-XXX
SLS 40c Lipo - 6s 5000mah
x447 andy brown tongue cut
futuba 4grs
the esc, battery and remote are all brand new, the motor's are used.
Im budgeting maybe $1000 to get it completed, i've had the thing such a long time and its such a shame i don't get any use out of it, I'd like it to be somewhere near the 80mph mark and depending on the builders experience willing to take suggestions on one day going north of 100.
I've had lots of expert advice over the years on building it but even last time i finally thought it was all set on the water she had some water ingress and cut out... i've had experience in the past of seeing a boat go up in flames due to my inexperience and theirs a lot more $$ invested in this..
Comment