Liquid Mad, my new WhipLash 20

[Raydee]

Guys I am going to post a drawing of my fin but please keep in mind that I am no cad guy so the pic is pretty elementary at best.

[Raydee]

Ok here is the pic of the fin. I have no idea why but it just makes my Whip run faster and turn better. We also tested the fin on another Whip and it worked the same on that boat also. The Fin was designed by my bud for his Atlas hull and all I did was scale it up a bit and make it about 1/4" longer.

http://i284.photobucket.com/albums/ll35/Raydee32/Whiplash%2021%20FE/Whiplash20fin.jpg

Here is a pic on my hull

http://i284.photobucket.com/albums/ll35/Raydee32/Whiplash%2021%20FE/fin2.jpg

http://i284.photobucket.com/albums/ll35/Raydee32/Whiplash%2021%20FE/fin4.jpg

BTW I dropped my Neu 1515 1Y in the hull today (I was bored) and will give it a few tests tomorrow if the weather holds up.

[Doug Smock]

i ran my 1Y in FE2 this weekend on M447 and 645 and it loved it
after a 6 lap legal IMPBA race i ran 89 deg motor temps and 121 deg pack temps 1P

Better have that thermometer calibrated Taylor. Unlless your water temp is 50'F already.

Our results mirror Fluids, and have for two years.

guys,

Doug

[andym]

Raydee thanks for that it looks similar to a Tipain rigger fin I run on my xs2 with great success. Will try that first and then yours and compare the two.
Heath I will try the strut at 15mm after I try fins so as to change one thig at a time. Thanks for all the info guys. These realy are great hulls to run and fun to build... Now to start the sport 40 on 8s

[Eyekandyboats]

Doug. i relize the readings are wrong on many thermometers. I used a laser hand held one from some one else in our club.
temps are correct.
it is extremely a lose running hydro with the props that were not stock.

[fhhobbies]

Where can a guy get a couple of these Whiplash 20s?

[andym]

Blazer Marine

[Raydee]

http://www.blazermarine.com/

[andym]

Raydee you do make life easy for some.............................................. .............

[fhhobbies]

Nice thanks!

[Raydee]

Raydee you do make life easy for some.............................................. .............

Well I try my best.

[fhhobbies]

I think I may get a couple of these, do you guys have layout pics of your boats? These seem like really great boats!

[Doug Smock]

it is extremely a lose running hydro with the props that were not stock.

Hi Taylor,

i ran my 1Y in FE2 this weekend on M447 and 645 and it loved it
after a 6 lap legal IMPBA race i ran 89 deg motor temps and 121 deg pack temps 1P

For your consideration,
Perhaps that should have been included in your original post.
Water and air temps are also an important factor.

Doug

[andym]

May be even a seperate post!!!!!!!!!!!!!!!!!!!!

[Scott T]

Looking good Andy (the boat of course!). We'll all have to get together next year at a sanctioned event and have a Whiplash Cup! I hope to go to the Nationals in Sydney next year, so I hope to see you there!