-
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was -
the mount looks great, but I'm thinking it isn't gonna work well on my mono. thats the kintec one right?
the adjustment screws down the bottom become so obstructed when mounted on slants, you would have a really hard time getting an allen key in there.
may have to rethink my plan....There's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
I installed one in a MHZ Lizard Extreme and didn't have any issues...for what it's worth.Originally posted by Luck as a Constant View Post"There's nothing else I really want to do other than get up and build boats." - Mike FioreComment
-
I'll be using one in my mono too. Thanks for the pic Joel, that's how I was gonna set my mono up, pretty much the same layout. I was just on the fence about it.Originally posted by Rocstar View Post
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
Appreciate the pic and insight Joel.Originally posted by Rocstar View Post
It does look a bit cramped tho no?
Sent from my iPhone using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
Not bad. I use short Allen wrenches though. It's a pretty cool mount with a lot of adjustment.Originally posted by Luck as a Constant View Post"There's nothing else I really want to do other than get up and build boats." - Mike FioreComment
-
Why would you need to get at the bottom ones anyway? The motor will go in and out for maintenance just using the top ones at the back and the ones into the front endbell, just set it to the angle you want before gluing it in.
If you want to alter the angle for some reason once it is built, you will have to rip out and redo the stuffing tube anyway so cutting down an allen key would be the least of my worries.Paul Upton-Taylor, Greased Weasel Racing.Comment
-
Paul, it would probably be never, but if I ever changed a motor to a different length or something, it would be nice it they were relatively easy to access
Sent from my iPad using TapatalkThere's a hole at the center of earth where the rest of the world sinks but i stand still...Comment
-
Last edited by kfxguy; 04-28-2015, 09:24 PM.32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
I peeled at 1 hr and came out good ! I think it helped the edges to settle a little more too."Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
I'll have to try it at an hour. i'm thinking 4 hours seem to be best tho. it seems like the jb "tears" cleanerOriginally posted by rearwheelin View Post32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
Just ran across this thread, nice work!NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=Comment
Comment