Mr Krabs build

[RandyatBBY]

Paddy has you covered I missed you painted the helmet

[Xzessperated]

Paddy ... the paint job on that boat is ok but not much more ...here is a paint job done by a guy that goes by Guyton.

And this is a helmet that I did about a year ago.

Wow. Not sure what you have in the water over that way Chuck but it sure works magic. I have problems drawing stick men.

[egneg]

I have looked back at what I posted and it didn't come across very well. I would like to apologize to Randy and Paddy for disrupting this thread.

[Xzessperated]

I have looked back at what I posted and it didn't come across very well. I would like to apologize to Randy and Paddy for disrupting this thread.

Chuck I admire a man that is big enough to say he is sorry. I get to say that word about 33 times every day and that is just to the wife. I knew what you were trying to say and I knew it just had a rough passage out.

[Flying Scotsman]

Paddy, that is a really cool looking rigger, Andrew must be really pissed off. Randy, super job and I trust you are in good health.

Douuggie

[RandyatBBY]

Paddy, that is a really cool looking rigger, Andrew must be really pissed off. Randy, super job and I trust you are in good health.

Douuggie

Thanks,

Andrew??? what is he pissed about?

Health other than the hole in my nut and wallet. I am OK

[Flying Scotsman]

I was refering to ANDY. As you now have the upper edge, a better boat and superior knowledge due to how you to control DUCKS. Health was meant for Randy at BBY

Douggie

[Xzessperated]

I was refering to ANDY. As you now have the upper edge, a better boat and superior knowledge due to how you to control DUCKS. Health was meant for Randy at BBY

Douggie

Andy is going to be pissed when he finds out I ran his old Xs 2 rigger this morning with a 6 XL on 4s and an X640 prop. It was flying until it started flying for real.
I want to see how fast one of the Chinese motors will go before they blow.

[slimshady]

Hi Paddy,

I have designed a decal for the front of Mr Krabs, not sure if it works, it might need to be a bit wider and a bit longer, please be honest and let me know. The PDF should be 1:1 so you can print it, cut it out and offer it up. When we have perfected the design I will send you the DWG / DXF file so you can have it printed by your local decal shop. I could quiet easily have 2 produced locally and send you one but the postage cost might outweigh the additional cost (not sure yet, I need to do a bit of research, obviously is the cost is low enough I will have 2 – 4 made and post a couple of them to you)

Once again please please please be honest, it will not offend me and it is no problem to make the decal wider or longer to suit Mr Krabs. I can make the inner front wider (more material) and also narrower.

Let me know what you think, and once again please let me know what way to go with the design.

Slim

[Xzessperated]

Hi Paddy,

I have designed a decal for the front of Mr Krabs, not sure if it works, it might need to be a bit wider and a bit longer, please be honest and let me know. The PDF should be 1:1 so you can print it, cut it out and offer it up. When we have perfected the design I will send you the DWG / DXF file so you can have it printed by your local decal shop. I could quiet easily have 2 produced locally and send you one but the postage cost might outweigh the additional cost (not sure yet, I need to do a bit of research, obviously is the cost is low enough I will have 2 – 4 made and post a couple of them to you)

Once again please please please be honest, it will not offend me and it is no problem to make the decal wider or longer to suit Mr Krabs. I can make the inner front wider (more material) and also narrower.

Let me know what you think, and once again please let me know what way to go with the design.

Slim

Slim thanks for sharing that sticker with me. I will cut it out later and see what it looks like on the boat. I will share some I am getting printed at the moment.



and the words

MR. KRABS

I will comment afer I see what yours looks like on the boat.
Merry Christmas to you and yours Slim. Do not drink anything that I would not which includes paint thinners, gasoline and soup made from the spit of the Loch Ness Monster.

[Ub Hauled]

You're funny...
LOL
I think you should update your "calling card" to this one...

[Xzessperated]

You're funny...
LOL
I think you should update your "calling card" to this one...

LOL. That looks like Andy's rudder Mr. Krabs has in his claw Jan. All Mr. Krabs. Now you are up crap creek without a rudder Andy.

[Xzessperated]

I made a few changes to Mr. Krabs and this morning he posted his best speed yet.
112 kph or 69.59 mph
Speed is not easy to get with this hull and I doubt that I will even come close to the 100 mph that I am after with the factory sponsons. I am starting to think I might make a new set of SAW sponsons in the new year.

[Flying Scotsman]

Paddy, you are a hoot. Merry Christmas to you and your family
I think the spit from the Loch Ness Monster was the "piece de resistance"
Andy will not understand this French phrase as he comes from the unwashed masses from the BIG ISLAND, unlike yourself from the cultured WEE ISLAND....FREE TASMANIA NOW.

Douggie

[Xzessperated]

Paddy, you are a hoot. Merry Christmas to you and your family
I think the spit from the Loch Ness Monster was the "piece de resistance"
Andy will not understand this French phrase as he comes from the unwashed masses from the BIG ISLAND, unlike yourself from the cultured WEE ISLAND....FREE TASMANIA NOW.

Douggie

LOL. Douggie we love the Scots down here. It is the festive season as you know and I will guarantee that in the next two days I am going to hear the wonderful sound of Bagpipes in our streets. Ahh that sound makes a man feel so good as he reaches for his LAPHROAIG Islay and thinks of days gone bye and the ones to come.
A very Merry Christmas to you and Dolly.


I am afraid Andy is probably in jail for hitting his boss at the Christmas party.