1st mono build 29 inch

[okieman98]

well, would you mind pointing me to the right direction?

this is what i came up with on them

http://www.uscomposites.com/cutters.html

[okieman98]

this was the other place i was looking at

https://www.acpsales.com/Scissors-Cutters-and-Fabric-Aids.html

there is one other thing i am going to try is a set of paramedic shears back in the day i use to carried these with me on the rescue unit u can cut a penny in half with them with no harm. going to dig mine out of storage before i order some of the others, they look like this

http://www.claussco.com/product/409463/ACM18053/_/7%27%27+Ti+Snip?utm_source=google&utm_medium=cpc&utm_campaign=adwords_pla&os=pla&m=3980&c=6&gclid=CjwKEAiA4YGjBRDOxa3XvfTnvSASJACC3bLBjcurcNWVc3_z7reXqKzHq8xqNk36A3Zgd-Gq_CsMjhoCAMDw_wcB

[tlandauer]

Hi,
Thank you SO much, I am getting ready for a build, need to reinforce, this will be a tremendous help!

[okieman98]

will let u know how the para shears work as soon as i find them. would be a lot cheaper in the long run it they work.

[okieman98]

how many channels do u need on the tx and rx for the boat

[okieman98]

well they trim cured fiber ok, but not raw fabric but mine are very old and kids have cut many penny's in half with them so i just going to order a new pair

Hi,
Thank you SO much, I am getting ready for a build, need to reinforce, this will be a tremendous help!

well they trim the cured edges pretty good but not cut the fibor

[olwarbirds]

how many channels do u need on the tx and rx for the boat

2...1 for throttle, 1 for steering....

[tlandauer]

well they trim cured fiber ok, but not raw fabric but mine are very old and kids have cut many penny's in half with them so i just going to order a new pair



well they trim the cured edges pretty good but not cut the fibor

Thanks for getting back to me, I will buy a scissor for CF, I figure it is a bit expensive but i am naturally clumsy and it might just save me from bungling up everything like Inspector Clouseau!

[okieman98]

2...1 for throttle, 1 for steering....

ok thanks

[okieman98]

just waiting on shears to come in so i can Finnish the cf, hurry up and wait seems to the the theme on this build

[okieman98]

Thanks for getting back to me, I will buy a scissor for CF, I figure it is a bit expensive but i am naturally clumsy and it might just save me from bungling up everything like Inspector Clouseau!

i order these, was told they do just as good as most, will let u know how they work when i get them in

http://www.amazon.com/gp/product/B00...ef=shptrk_scth

[olwarbirds]

Those should work, my buddy and I use the curved version of those and they work great...be worth the wait... DJ

[tlandauer]

Those should work, my buddy and I use the curved version of those and they work great...be worth the wait... DJ

[okieman98]

ok shears came in today. so did a little more work , laid one layer of cf and added the transom doubler and sealed with z poxy. The shears worked great would recommended them for the money. shaved me some time. but would buy a longer pair.

100_2262.jpg100_2263.jpg100_2264.jpg100_2265.jpg

[okieman98]

100_2266.jpg

hope it looks ok for my first time, seemed to seal good. nut might have to order some more carbon fiber to Finnish inside hull. but tell the truth enjoying the build and working with my hands again