My next build, TFL Ariane 2 Carbon Fiber

[flraptor07]

What prop do you plan to run with the 1527 1250kv?

It's gona be a little trial and error but I'm thinking I'm going to start with a x448 or something like that

[skeeler]

Thanks for the response. I'm still learning about prop selection, but I do know how important prop choice is.

[Brushless55]

Very nice looking hull... !
how much was the hull and hardware?
thanks

[flraptor07]

Very nice looking hull... !
how much was the hull and hardware?
thanks

I'd have to look for the exact price, I bought it direct from TFL with a couple of custom touches but it was a little over $400.00 shipped

[skeeler]

It's gona be a little trial and error but I'm thinking I'm going to start with a x448 or something like that

So, what prop did you settle on?

[flraptor07]

So, what prop did you settle on?

Well I changed motor again, it's got a TP 4070 40mm x 100mm 1770kv and it seems to like the Prather stainless 230 I have on it now which is 48.3mm 1.6 pitch

[785boats]

I'm running a 1600kv motor in mine on 6s. Until just recently I had been running a 1350kv set up. But now that I have the hull dialed in I felt confident in running the TP Power 4060 1600kv.

[flraptor07]

I'm running a 1600kv motor in mine on 6s. Until just recently I had been running a 1350kv set up. But now that I have the hull dialed in I felt confident in running the TP Power 4060 1600kv.

Mine's flying on the 4070 1770kv 6s, but I have a little more testing to do. Last time out it spun the insert on the collet and twisted the end of the flex. It's fixed now and I'm gonna run it this weekend, I'll post videos.

[martin]

Mine's flying on the 4070 1770kv 6s, but I have a little more testing to do. Last time out it spun the insert on the collet and twisted the end of the flex. It's fixed now and I'm gonna run it this weekend, I'll post videos.

What esc have you been using, thanks.

[skeeler]

I'm running a 1600kv motor in mine on 6s. Until just recently I had been running a 1350kv set up. But now that I have the hull dialed in I felt confident in running the TP Power 4060 1600kv.

What prop are you using with that motor/battery combination?

[skeeler]

Well I changed motor again, it's got a TP 4070 40mm x 100mm 1770kv and it seems to like the Prather stainless 230 I have on it now which is 48.3mm 1.6 pitch

Mine's flying on the 4070 1770kv 6s, but I have a little more testing to do. Last time out it spun the insert on the collet and twisted the end of the flex. It's fixed now and I'm gonna run it this weekend, I'll post videos.

Good information. Thanks for the update.

[flraptor07]

What esc have you been using, thanks.

I have a SF 240 pro plus, it's the smaller one not the 240 pro plus II but it still has data logging.

[785boats]

What prop are you using with that motor/battery combination?

skeeler.
I'm using a CNC 446/3 blade de-tongued & cut down to 43mm on the 1600kv motor.

[T.S.Davis]

1527/1y on 6s, try an x452. If the boat runs free and clear you might get away with a 455 de-tongued.

[skeeler]

I'm using...

Thanks for the info.