Twin cat build

[Alexgar]

So im thinking im going to take on my first twin cat build. Im still looking for a hull but have been gathering parts. Proposed power will be 2 lehner basic 5300 kv ratted at 700 watts a piece and 60 amps, either 2 schulze 105wo or 2 bk warrior 9920 escs both rated at about 100 amps and 2 drivelines from a kos hull very nice i hadnt seen one yet and they have ball bearings. That being said i was looking for a 24-27" hull ,does that sound about right?

[Alexgar]

pics

Here are the parts I have

[twissted]

what length of hull you after?

[Jesse J]

i've got a slightly beat up AM mean machine I'll sell ya! that would be a great platform for twins - lots of room and great hull.

[Alexgar]

Is that the yellow one I sold your friend?

[Alexgar]

what length of hull you after?

Between 24-27"

[borgie]

here you go :) http://www.horracing.com/product_inf...roducts_id=847

[Alexgar]

Ok back to this thread thanks to nitronuts good light layup lynx

[ls1fst98]

my first thougth was a lynx, i picked one up to do twins. look froward to seeing yours

[Fella1340]

Great choice, that will be some serious fun.

[Alexgar]

need to order or fab motor mounts i made some from some plate aluminuin but it was to flimsy, my potential power plants

[Alexgar]

esc i have are schulze 105w, swordfish 120 or bk warrior 9918, and motors are cc 5700 and lehner 5300

[ls1fst98]

i made mounts out of 1.5mm cf plate for my twin lynx. hope they are thick enough. is the cc 5700 the car motor? if so thats a screamer.

[Alexgar]

Got a pic ?

[ls1fst98]

IMAG4719.jpgIMAG4720.jpgIMAG4722.jpg

thats the mount i made. i havent gotten thme in the boat yet, its a build in progress. i have everything for it but flexes and collets.