need help on mc aquacraft on install leopard 4074

[george91]

Need to no how far you move the motor mount back or if it well fit right in but I think that would be to easy hope you can help thanks

[straitline]

Sorry just saw this post. I have the same set up you are talking about. The easiest way is to just flip the motor mount bracket around and that motor will fit under the lid. you will have to shorten you shaft also. My suggestion now is the best tome to upgrade to a better quality od flex shaft sold by OSE. Have fun I did!

[george91]

Thanks for the info when I cut the flex shaft do I have to sauder the end

[straitline]

Yes

[straitline]

Yes you will. Let me know if you need anymore info on that set up. How many cells are you planning to run?

[george91]

I plan on running 4cell what speed did you get out of that set up

[straitline]

I was clocked at 55mph on 5s.

[george91]

How many amp esc where you running i am going to run seaking 180 how many cell can the leopard handle

[MAMBA2200]

I used a flex from a ul1 fit perfect after I cut the stuffing tube

Sent from my FE Phone

[MAMBA2200]

Here is a pic of my finished 4074 installuploadfromtaptalk1368107306204.jpg

Sent from my FE Phone

[george91]

Thank you for all help guy's

[straitline]

Nice pic Mamba it was you that gave me the set up for my MC!! It worked great until the blow over! lol. I plan on repairing that hull and using it again in the future but I will slow it down some to keep it in tact.

[MAMBA2200]

I'm planning on getting mine faster than my previous 56mph mark I hope anyway I want mid to upper 60's lol

Sent from my FE Phone

[straitline]

Mamba good luck on that mark of 60 mph. All I know is that my MC was like crazy fast at 55. I would love to see a 60 out of your boat. My MC hull is down for the count right now but will return! Keep us posted.

[MAMBA2200]

Thanks strait I think I will be able to get there I might have to push my luck A little but hey that's the fun of why we do this right lol

Sent from my FE Phone