BBY P LTD Sport Hydro or N2

[hookedup]

Not yet I will be putting them up after the Nats is done and doing a lot of changes to the site. I can do phone orders or Email.

okay thanks Randy i'll be contacting you shortly. do you have them in stock? whats the turn around time after ordering?

[RandyatBBY]

As always I am building to order. It all depends on what you want for the time I am not too backed up at this point about 3 boats I am finishing up and a few orders going at this point.

[RandyatBBY]

All most done with the paint on this one.


Uploaded with ImageShack.us

[Brushless55]

Another nice build Randy!

[hookedup]

As always I am building to order. It all depends on what you want for the time I am not too backed up at this point about 3 boats I am finishing up and a few orders going at this point.

okay thanks Randy, i'll give you a call after the Nats.

[RandyatBBY]

Got it pined striped today.


Uploaded with ImageShack.us

[Brushless55]

I like it Randy!
sweet looking LSH

[RandyatBBY]

I like it Randy!
sweet looking LSH

Thanks it is real old school. I would call it "Baby Blue"

I have a real wild paint job going on with my new P rigger to be shown soon.

[RandyatBBY]

The boat is finished more pictures Monday. I have a district race to put on.


Uploaded with ImageShack.us

[Brushless55]

Nice job Rany

[BHChieftain]

I was brave (meaning stupid) enough to actually maiden this boat in a namba race... Randy hand delivered the boat at the lake and I managed to get the servo, RX, and flotation in place just before my first run. Forgot to confirm motor direction, so on first heat I hit the throttle and the boat plowed backwards into the shore (scratch one prop...). 2nd and 3rd heats ran solid (bone dry to boot). Made a strut adjustment on the 4th and was running a tad loose. After the race I brought the strut down just a hair and nailed the setup. A friend of mine made a video, hope he sends it to me soon.

Thanks Randy for an awesome build.

Chief

[Insaniac]

I was brave (meaning stupid) enough to actually maiden this boat in a namba race... Randy hand delivered the boat at the lake and I managed to get the servo, RX, and flotation in place just before my first run. Forgot to confirm motor direction, so on first heat I hit the throttle and the boat plowed backwards into the shore (scratch one prop...). 2nd and 3rd heats ran solid (bone dry to boot). Made a strut adjustment on the 4th and was running a tad loose. After the race I brought the strut down just a hair and nailed the setup. A friend of mine made a video, hope he sends it to me soon.

Thanks Randy for an awesome build.

Chief

Race results?

[Namba328]

I was brave (meaning stupid) enough to actually maiden this boat in a namba race... Randy hand delivered the boat at the lake and I managed to get the servo, RX, and flotation in place just before my first run. Forgot to confirm motor direction, so on first heat I hit the throttle and the boat plowed backwards into the shore (scratch one prop...). 2nd and 3rd heats ran solid (bone dry to boot). Made a strut adjustment on the 4th and was running a tad loose. After the race I brought the strut down just a hair and nailed the setup. A friend of mine made a video, hope he sends it to me soon.

Thanks Randy for an awesome build.

Chief

Sweet boat chief. I hope you give them all a run for there money in our district races.

[Insaniac]

The boat is finished more pictures Monday. I have a district race to put on.


Uploaded with ImageShack.us

Beautiful!

[BHChieftain]

Here's the 5th run, after the race. I think I have the strut dialed in:

https://www.youtube.com/watch?v=j96Z12PdVmc

Chief