Cheetah Innards

[properchopper]

Stuffed the P-Sport during WWIX practice. Was floating upside down. Tyler was doing some laps with his rigger so I waited for him to come in. When I got to where it was, it wasn't there anymore. Had a brand new set of Dinogys inside. Had to call the Shaugnessy for consolation.

Nice build EOD. No need to swap out the brass bolt with nylon. Brass works fine.


You didnt loose a FE30 did you Tony?? Welcome to the Club!!

Stuffed the P-Sport during WWIX practice. Was floating upside down. Tyler was doing some laps with his rigger so I waited for him to come in. When I got to where it was, it wasn't there anymore. Had a brand new set of Dinogys inside. Had to call the Shaunessy for consolation.
My replacement has 2 part foam in the sponsons and pool noodle any place there is room.

[Chilli]

Have you lost a FE 30 chilli? Looks like we got a lil club going, 3 members so far?

Yeh Buddy. LMAO. She blew over in SAW testing and hit transom first. Gone without a trace..... Hull, hatch w/floatation, Neu 1521 1D, Castle Ice 240....

[Fluid]

It is tough to install enough flotation in an FE-30 to keep it afloat if the hatch comes loose. My P-LSH weighs 5.2 lbs so it would take 150 cubic inches of flotation. A P-Sport would need even more....



.

[Eodman]

Concerning the brass bolt --- I'm hearing two trains of thought! Replace with nylon don't replace .... I think I'll ere on the side of caution! For the price of a few nylon bolts I don't want to lose my investment to a turtle shell!!!!!!